Anhui solar powered sewage treatment manufacturer

NegotiableUpdate on 04/05

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Anhui solar powered sewage treatment manufacturer remote control system, municipal power complementary sewage treatment equipment, wind solar complementary sewage treatment equipment, integrated sewage treatment equipment, carbon steel sewage treatment equipment, etc.

Product Details

Anhui solar powered sewage treatment manufacturerIt uses solar photovoltaic panels to convert solar energy into electrical energy for treating sewage. After the battery is fully charged, even if it rains continuously for 7 days, it can ensure the normal operation of sewage treatment. After multiple procedures such as pipeline collection of sewage, anaerobic biological treatment, contact oxidation, sedimentation, and standard discharge, the originally turbid sewage becomes very clear.

Features:

1. No need for irrigation, with a suction height of up to 7m, a lift of 50m, and an outlet pressure of 6kgf/CmZ.

2. Good flow performance, allowing for the passage of particles with a diameter of up to 10mm. When pumping mud and impurities, there is minimal wear on the pump.

3. The head and flow rate can be infinitely adjusted through the opening of the air valve (the air pressure can be adjusted between 1-7kgf/cmZ).

4. The pump has no rotating parts and no shaft seal. By relying on the reciprocating motion of a pair of diaphragms, various media are pumped. Due to the separation between the moving parts of the pump and the working medium, the transported media will not leak outward, avoiding environmental pollution and personal harm.

5. Not using power supply, can be used in flammable and explosive places, safe and reliable.

6. It can be immersed in the medium instead of using a submersible pump to pump liquid.

Anhui solar powered sewage treatment manufacturer

Firstly, after the centralized collection of domestic sewage, it enters the grid well of the sewage treatment system, which is equipped with a filtering grid inside to treat and remove suspended solids in the sewage. After grid treatment, the coarse particles, insoluble COD, SS, etc. in the water are greatly reduced, and the grid slag is manually cleaned and transported for safe treatment.

After passing through the filter grid to remove some suspended solids, as well as organic and inorganic substances suspended in large particles, the sewage enters the anaerobic tank, where anaerobic microorganisms are used to degrade the organic matter in the sewage, oxidizing the organic matter in the large molecule complex chain into small molecule single chain organic matter. Wastewater and phosphorus containing sludge returning from the sedimentation tank release phosphorus in an anaerobic state, which can be absorbed in a large amount in a solar aerobic tank for phosphorus removal through sludge discharge. Part of the ammonia nitrogen in the sewage is converted into NH3-N in the solar aerobic tank. After passing through the reflux pump, the sewage enters the anoxic tank. Denitrifying bacteria use the organic matter in the sewage as a carbon source to reduce the large amount of NO3-N and NO2-N brought into the reflux mixture to N2 and release it into the air, thereby removing ammonia nitrogen.

After undergoing solar aerobic reaction, the organic pollutants in the sewage have been basically digested by microorganisms, and the mixed solution flows into the sedimentation tank for sedimentation treatment. To ensure the sludge concentration in the biochemical tank, the sludge from the sedimentation tank is returned to the front tank.