-
E-mail
jieyichu_1112@qq.com
-
Phone
15333168188
-
Address
Wanglong Village, Gu'an Hot Spring Leisure Business Industrial Park, Langfang City, Hebei Province
Product Categories
Jieyi Dust Removal Equipment Factory
Bag type pulse dust collector
NegotiableUpdate on 02/27
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Bag pulse dust collector, pulse bag dust collector, 48 bag single machine warehouse top dust collector, industrial dust removal equipment, small bag dust collector, widely used in various occasions; One machine solution, suitable for boilers, machinery, metallurgy, mining, rubber, flour, chemicals, pharmaceuticals, carbon, building materials, etc
Product Details
Bag type pulse dust collectorFeatures:
1. High dust removal efficiency
The dust concentration at the outlet of the bag filter is within tens of mg/m3, and it has a high classification efficiency for fine dust with sub micron particle size.
2. Wide range of air volume processing
Wide range of air flow processing, used for dust removal of flue gas in industrial furnaces to reduce the emission of atmospheric pollutants.
3. High temperature resistance
When using high-temperature resistant filter media such as glass fiber polytetrafluoroethylene P84, it can operate under high temperature conditions above 200 ℃.
Bag type pulse dust collectorworkmanship
-
Made from carbon steel and stainless steel raw materials, thickened carbon steel and stainless steel raw materials are rolled and welded.
-
Selected pulse valves and airbags, with simple structure, strong sealing, and safe and convenient operation.
-
Carefully select cloth bags and frames, choose the suitable cloth bag frame according to the working conditions, and select according to needs.
Debugging of Pulse Bag Dust Collector:
1. Prepare the equipment for no-load operation and debugging.
2. Follow the steps below to debug:
(1. Adjust the dust cleaning controller to ensure that the electromagnetic pulse valve operates in the correct sequence and that the dust cleaning units are in the correct order.).
(2) Check the voltage of the electromagnetic pulse valve and electronic control part (24V or 220V),
(3) Check if the sealing components on the equipment are loose or detached.
(4) The compressed air pressure for blowing should be maintained at 5-7kg/cm.
(5) Check if the motor and mechanical transmission parts on the equipment are operating normally.
(6) Check if the bag cage and filter bag on the equipment are securely installed.
(7) Perform equipment no-load operation debugging, requiring all parts to operate normally.
(8) Perform equipment load operation debugging. Require all parts to operate normally and adjust the cleaning cycle (resistance method or timing method) according to changes in equipment operating resistance.
