Welcome Customer !

Membership

Help

Nanchang Yangfan Environmental Protection
Custom manufacturer

Main Products:

cep-online>Products

Bed unit ozone disinfection machine

NegotiableUpdate on 05/08
Model
Nature of the Manufacturer
Producers
Product Category
Place of Origin
Overview
The S1600 bed unit ozone disinfection machine mainly consists of an ozone generator, solenoid valve, analysis box, cooling fan, chassis, and controller. It is a bed unit ozone disinfection machine that uses ozone as the main sterilization factor.
Product Details


S1600Bed unit ozone disinfection machine

1. Strength of main bactericidal factors

AES-S-1600 typeBed unit ozone disinfection machineOzone outlet concentration ≥ 1600㎎/m3

2. Kill microbial categories

This function can kill Staphylococcus aureus and Staphylococcus aureusPseudomonas aeruginosa, Candida albicans, natural bacteria, etc.

3. Service life of ozone generator

1. The effective service life of the ozone generator is ≥ 20000 hours.

2. The ozone generator should be replaced if the cumulative operation of this machine is ≥ 20000 hours.

4. Scope and duration of product use

S1600Bed unit ozone disinfection machine Used for disinfecting bedding units in hospitals and hotels,A disinfection cycle is 70 minutes.

5. Product usage conditions and main technical parameters

51Product usage conditions

1Temperature: 5 ℃ -40 ℃;

2Relative humidity: 40% -80%;

3Atmospheric pressure: 860hpa-1060hpa;

5.2Main technical parameters

1. Net dimensions: 420mm × 390mm × 980mm(length × width ×High, excluding packaging boxes;

2. Net weight: 35kg (excluding packaging box);

3Supply voltage: AC220V ± 10%;

4Power supply frequency: 50Hz ± 1Hz

5Input power: ≤175W;Fuse model: φ 5A 5 × 20mm;

6. Dual bed simultaneous disinfection: This product can disinfect one bed in a single channel or dual channel, and can also use the left and right channels to process adjacent beds simultaneously.

7. Output streamQuantity: Each route is ≥20L/min;

8Disinfection cycle setting: single bed: exhaust time: 5 minutes; Charge O3 Time: 15 minutes; Disinfection time: 30 minutes; parsingTime: 15 minutes; Total: 65minute; Twin beds: Extraction time: 10 minutes; Charge O3 Time: 30 minutes; Disinfection time: 30 minutes; Analysis time:30 Minutes; Total: 100 minutes.

9Ozone delivery silicone rubber tube length: 2m

10Disinfection bed cover (disinfection bag) external dimensions:(1) Disinfection bag 2200 mm × 1400mm;

(2)Disinfect bed cover 2700 mm × 1800mm; (3) Disposable disinfectant bed cover 3200 mm × 1800mm

11. Ozone leakage in the working environmentQuantity: Under human conditions, the average allowable ozone concentration in indoor air environment for 1 hour is≤0.1mg/m3

12. Ozone residue in the disinfection zone: ≤ 0.16mg/m ³;

12Work noise: ≤ 50dB。

6. Product usage instructions

Use 1 unitAnsen brand AES-S-1600 modelBed unit ozone disinfection machineIf disinfecting on a single bed,Connect the trachea with the disinfection belt and machine, click on the button to complete the work, and the disinfection cycle is 70 minutes.

7. Unpacking, Inspection, and Equipment Installation

101Unpacking and Precautions

1. After opening the box, first remove the accessory bag from the packaging box.

2. Take out the disinfection trachea from the attachment, dip the soft end with water and insert it into the upper air head of the disinfection device back panel.

3. Hang the other end of the sterilizer tube onto the recessed hanging plate below the handle, and the installation work is now complete.

10. 2Inspection content

1. Is there any damage or scratch on the appearance of the machine inside the box;

2Is there any abnormal noise when gently shaking the machine (such as small metal parts falling off, glass fragments, etc.);