CP96SC80 * 300C square cylinder body cylinder

CP96SC80 * 300C square cylinder bodyMovement speed:

It mainly depends on the input compressed air flow rate of the cylinder, the size of the cylinder inlet and outlet ports, and the inner diameter of the conduit. High speed movement should be taken as the maximum value. The speed of cylinder movement is generally 50~1000mm/s. For high-speed cylinders, a large inner diameter intake pipe should be selected; For situations where the load changes, in order to achieve a slow and smooth operating speed, a throttling device or a pneumatic hydraulic damping cylinder can be used, which makes speed control easier to achieve. When selecting a throttle valve to control cylinder speed, attention should be paid to: when horizontally installed cylinders push loads, it is recommended to use exhaust throttle speed regulation; When lifting loads with vertically installed cylinders, it is recommended to use intake throttle speed regulation; When ensuring smooth travel and avoiding impact, cylinders with buffering devices should be selected.

Magnetic switch:

The magnetic switch installed on the cylinder is mainly used for position detection. It should be noted that the cylinder has a built-in magnetic ring, which is a prerequisite for using a magnetic switch. The installation forms of magnetic switches include: steel strip installation, track installation, pull rod installation, and true joint installation.

　　CP96SB63-310C, CP96SC100-225C standard cylinder

CP96SC80 * 300C square cylinder body

Built in magnetic ring D non-magnetic switch (built-in magnetic ring)
Installation Method B Basic Type
Cylinder diameter 80, cylinder diameter 80mm
Cylinder stroke 300
With protective cover - without protective cover
Dual trip marking - No dual trip marking
Cylinder stroke 2- No cylinder stroke 2
With protective cover 2- without protective cover
Magnetic switch model - non-magnetic switch
Number of magnetic switches -2 or none
Customized Specifications - Standard

Original cylinder CP96SDB80-300C

Brand: SMC Japan
Category: European standard cylinder
Series: C96 series
Cylinder diameter: 32-250MM
Model: CP96SDB80-300C

Product Specifications
Cylinder diameter: 32MM to 250MM
Action mode: double acting
Fluid used: Air
Guaranteed pressure resistance: 1.5MPA
Maximum operating pressure: 1.0MPa
Zui low usage pressure: 0.05MPa
Environment and fluid temperature: without built-in magnetic ring: -20 to 70 degrees
Environment and fluid temperature: Built in magnetic ring: -10 to 60 degrees
Lubrication: No need
Piston speed: 50-1000MM/S and 50-700MM/S
Buffer: Two end air buffer

Product Model

MHL2-10D-Y59B

CDM2C40-150-C73L

MDB1D50-50

CDU16-20D-M9N

MGPM32V-25

CDG1FN40-500

CP96SB63-400

MHC2-10D-M9BL

CDM2B32-75-M9B

CDM2L20-250A-M9BW

MXQ12-10C-M9BL

CDM2L40-300J-C73L

CU20-80A

CXSL15-20-M9BL

CDQ2B20-20DMZ-M9B

CDM2B40-125-C73L

MGPM16-100-M9BL

MDBB100-100-M9B

CDA2T80-220-Z73L

CDQ2B63-30DZ-XC8

BAF-08S

CDM2C40-125-C73L

CDQ2B25-50DZ-XC8

CS1Q125-320

CDM2C40-130-C73L

CDQ2B50-50DZ

MDBL32-175-Z73

MHF2-12D2

Cxsm 25 - 100 a

CRJU05-180E-M9BL

MGPL25-75A-Z73L-XC69

CDQ2KB32-50DMZ

MLGPM40-125-B

MDBT63-100-Z73

CDM2B32-190A

CDUK20-5D-M9BL

CM2B20-35＋65-XC11

CDRA1BW50-180

MY3A40-600

CXSM20-50-Z73

MDB1F32-350

RSH20-15DL-D

Example of ordering:
Required cylinder diameter: 40, stroke 80, built-in magnetic ring, with two magnetic switch types
Model: C96SDB40-80
Magnetic switch: D-A93L
Switch fixed code: BMB5-032

Required cylinder diameter: 63, stroke: 100, built-in magnetic ring, foot mount installation
Model: C96SDB63-100
Accessory: L5063

Common models:
C96SDB32-50C
C96SDB32-80C
C96SDB32-100C
C96SDB32-125C
C96SDB32-160C
C96SDB32-200C