Intelligent electric regulating globe valve

NegotiableUpdate on 04/27

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The intelligent electric regulating shut-off valve cools down after the shut-off valve is closed, causing the valve components to contract. The operator should close it again at an appropriate time to ensure that there are no fine gaps on the sealing surface. Otherwise, the medium will flow through the gaps at high speed, which can easily erode the sealing surface.

Product Details

Intelligent electric regulating globe valveIntroduction:

The manufacturer of explosion-proof electric globe valves is regulated, and the intelligent explosion-proof actuator adopts an intelligent integrated module with explosion-proof performance up to BT4, making it more convenient and simple to use, and easy to operate. Electric globe valve, also known as electric cut-off valve, is a type of valve widely used in X. It is different from electric ball valve. The reason why it is popular is that the friction between the sealing surfaces is small during the opening and closing process, it is relatively durable, the opening height is not large, it is easy to manufacture, and easy to maintain. It is not only suitable for medium and low pressure, but also for high pressure. The closing principle of an electric globe valve is to rely on the electric thrust to rotate the valve stem, so that the sealing surface of the valve disc is tightly adhered to the sealing surface of the valve seat, preventing the flow of the medium. The electric globe valve only allows one-way flow of the medium and has directionality during installation. The structural length of the globe valve is greater than that of the gate valve, and the fluid resistance is high. During long-term operation, the sealing reliability is not strong.

Intelligent electric regulating globe valveProduct Features：

① The sealing surface of the valve disc and seat is made of hard welding, which is wear-resistant, high-temperature resistant, corrosion-resistant, scratch resistant, and has a long service life.

② The valve stem material is nitriding steel, and the surface of the valve stem after nitriding has high hardness, wear resistance, abrasion resistance, and corrosion resistance.

③ Due to temperature, pressure, and other factors, valve bodies and covers with diameters below DN50 are made of forged parts, while valve bodies and covers with diameters above DN65 are made of cast steel.

④ The valve body material variety is complete, and the packing and gasket can be reasonably selected according to actual working conditions or user requirements, which can be applicable to various pressure, temperature, and medium working conditions.

⑤ When installing the valve, pay attention to the flow direction of the medium and install it strictly in the direction indicated by the valve flow arrow.

⑥ Electric globe valves should be installed vertically as much as possible, with the valve stem facing upwards.