CP96SC80 * 300C standard cylinder

CP96SC80 * 300C standard cylinderIntroduction:

The commonly used specifications and dimensions of cylinder models are mainly divided into domestic and foreign ones. Taking standard cylinders as an example, foreign cylinder models mainly include Festo type DNC, SMC type MBB, CP96, CS1; Domestic cylinder models mainly include QGB, QGS, JB, Taiwan, China's cylinder models mainly include: Adecco SC, SI, SU, SE, etc.

CP96SC80 * 300C standard cylinderFeatures:

1The cylinder diameter ranges from small to large, with diameters ranging from 32mm to 250mm and cylinder strokes ranging from 5MM to 4M. We can customize to meet the different needs of different users, and we also have large cylinder diameters of over 250mm. Please feel free to learn more.

2. Both the front and rear end caps of the cylinder are equipped with buffering adjustments, allowing the cylinder piston to operate at both ends with strong impact force to prevent damage to the front and rear ends.

3. There are various ways to fix and install cylinders, which are designed to meet the application needs of equipment automation. The following will provide a detailed introduction

CP96: SMC brand, ISO standard square cylinder;
SD: The cylinder piston is equipped with a built-in magnetic ring
B: Installation type: Basic installation type, without installation accessories (cylinder rod side, rodless side with built-in threads)
80: Cylinder diameter, 80mm
50: Cylinder stroke: 50mm
A93: Equipped with 2 magnetic switches of the A93 series (used to detect the position of cylinder movement)

How to select cylinders (cylinder model selection)? Firstly, the type of cylinder should be selected based on its main function, location, installation requirements, and on-site operation form: standard cylinder, mini cylinder, ultra-thin cylinder, dual axis cylinder, rodless cylinder, etc; To meet the actual requirements of the cylinder diameter and distance (stroke) used in mechanical automation equipment.

Cylinder diameter: refers to the diameter of the inner wall of the cylinder, mainly determined by the load of the cylinder and the pressure of the gas supply. The required cylinder pushing (pulling) force can be calculated based on the load and the normal operating pressure of the system; Attention: When selecting a cylinder, its working load should be between 60% and 80%. Under the same air pressure, the larger the inner diameter, the greater the thrust of the cylinder.

Travel: Refers to using a small standard travel beyond the distance traveled by the workpiece as the basis for determining the travel. For example, in actual use, if the cylinder is required to move a certain workpiece a large distance of 97mm, the standard stroke series is adopted. If it exceeds 97mm, the standard stroke is selected as 100mm. Some people believe that this method: the error distance between the piston rod extending and retracting, most people think that the exposure of the cylinder itself is also considered as stroke, but in fact, this is incorrect and cannot be calculated as stroke.

The functions of standard cylinders commonly used in China are roughly similar, mainly to solve the installation method and required distance of mechanical equipment automation. Below, the editor has compiled representative methods for cylinder selection, taking you to understand the basic knowledge and working principle of cylinders.