Cement component analyzer

BL2020-10X Cement Component Analyzer

Adding admixtures to cement clinker can improve cement performance, save clinker, reduce energy consumption, and adjust cement grade. However, the content and type of admixtures added can affect the physical properties such as strength of cement. Since the implementation of GB/T 12960 "Quantitative Determination of Cement Components", it has been well applied in thousands of cement enterprises across the country,BL2020-10X Cement Component AnalyzerThis method can quantitatively determine the content of volcanic ash mixed materials, fly ash, slag and other components in cement, and is suitable for Portland cement, ordinary Portland cement, slag Portland cement, volcanic ash Portland cement and fly ash Portland cement. Therefore, GB175-2007 "General Portland Cement" specifies the types and amounts of admixtures added to cement, and determines that cement with a admixture content exceeding the maximum limit is unqualified. Therefore, quantitative determination of cement components is necessary.

Quantitative determination basis for cement components

BL2020-10X Cement Component AnalyzerIt is suggested that the new standard GB 175 "General Portland Cement" to be released on October 1, 2020, stipulate that the inspection of admixture content and types will be included in the factory inspection and type inspection. The GB/T 12960-2019 "Quantitative Determination of Cement Components" revised by the National Cement Quality Supervision and Inspection Center will be officially implemented on September 1, 2020. This standard provides more accurate and adaptable methods for cement enterprises and third-party laboratories to determine the content of each component in cement, strengthens the supervision of the types and dosages of admixtures in cement, effectively improves cement quality, and continuously promotes the process of cement quality testing and quality control in China.

Method and equipment for quantitative determination of cement components

GB/T 12960-2019 "Quantitative determination of cement components" specifies the benchmark method for determining cement components. The cement component analyzer can be used to determine the components of volcanic ash mixtures, fly ash, and granulated blast furnace slag.

The BL2020-10X cement component analyzer (hereinafter referred to as "BL2020-10X") not only meets the needs of cement enterprises in China, but also can be used for daily testing in third-party laboratories, making it a laboratory equipment. BL2020-10X

Advanced semiconductor cooling components are used, and multiple adjustable control parameters are achieved through self cooling technology. There is no need for external circulating cooling water, and the system can reach a constant temperature within the range of 1 ℃ to 50 ℃, regardless of the ambient temperature. The temperature control accuracy is less than ± 0.5 ℃, and the instrument has functions such as constant temperature, timed reminder, magnetic stirring, and temperature correction.

In addition, BL2020-10X has a shorter constant temperature time, with distilled water in the constant temperature bath rising from 10 ℃ to 20 ℃ in just 3 minutes and dropping from 20 ℃ to 10 ℃ in just 5 minutes. This not only improves the efficiency of the instrument, but also provides more valuable time for testing personnel.

Power supply voltage: 220V 50/60Hz 350W; Constant temperature range: 1 ℃ to 50 ℃;

Temperature control accuracy: ＜ ± 0.5 ℃.

BL2020-10X Cement Component Analyzer