Concrete roughening high-pressure water gun - high-pressure cleaning machine

NegotiableUpdate on 01/08

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

With the development of new building systems, in order to avoid wall tiling and exterior wall decoration, the installation of insulation materials may cause hollowing, weak bonding between new and old concrete, and excessive mortar usage. Wall roughening has become a necessary inspection item before the completion of construction projects. The high-pressure water gun equipment for concrete roughening is therefore also a standard supporting equipment in building assembly.

Product Details

Concrete capillary high-pressure water gunThe advantages of fur

1. From the problem of tile hollowing caused by falling tiles, high-pressure water can form a rough surface with a pile depth greater than 2cm or a width smaller than 1cm in the source solution. The tile adhesive can penetrate into the interior of the wall without hollowing, peeling, cracking, and other phenomena.

2. Cost saving, high-pressure water gun hair can be directly coated with cement slurry and tile adhesive.

3. Construction and environmental protection, methods that do not pollute the environment

4. Shorten the construction period, rough machining while working, and pull 800-900 square meters in 8 hours. Work efficiency is several times higher than physical labor.

Concrete capillary high-pressure water gunofProduct Parameters

Work pressure 2000 Bar

Work flow rate 4 L/Min 240 L/H

Motor speed 1000rpm

Power load 380V, 50Hz/32A/3P

Rated power 18.5kw

Inlet hose 15M

Cleaning medium: clean water (tap water)

Inlet pressure Min1.5bar/MX1bar

Filter Level 3 (coarse filter+fine filter)

Dimensions 1140 * 860 * 1050mm

Application areas: Concrete buildings such as highways, dock buildings, dams, hydropower stations, tunnels, bridges, etc.