High pressure roughening equipment for concrete aluminum formwork wall surface

High pressure roughening equipment for concrete aluminum formwork wall surfaceUtilize the erosion effect of high-pressure water jet to quickly roughen the top surface, vertical angle and other parts of the poured concrete. Under the erosion effect of high-pressure water jet, the emulsified skin layer on the surface of concrete quickly falls off, and the concrete surface becomes coarse sand to meet the requirements of surface treatment, making the new and old concrete tightly bonded.

High pressure roughening equipment for concrete aluminum formwork wall surfaceProduct advantages:

1. Fast cleaning speed, high efficiency, simultaneous chiseling and rinsing, improving economic benefits;

2. The high-pressure cement scouring machine can wash away the emulsified skin on the surface of concrete, avoiding the drawbacks of large concrete loss caused by manual chiseling;

3. The new concrete wall surface roughening process is achieved by breaking down the cement surface mortar layer, improving the bonding strength between the bonding material and the base layer, and enabling the ceramic tiles to bond with the wall
The surface fitting is more stable, without the hollowing, peeling and other phenomena after traditional carding process, and there is no rework phenomenon;

4. Fully utilizing the power of water, there is no dust or ash residue, and only a small amount of water and mortar on the ground can be naturally dried in a short period of time, reducing construction dust on the construction site, avoiding pollution to the working environment, improving the working environment for operators, and adapting to the requirements of civilized construction.

Product Parameters
Work pressure 2000 Bar
Work flow rate 4 L/Min 240 L/H
Motor speed 1000rpm
Power load 380V, 50Hz/32A/3P
Rated power 18.5kw
Inlet hose 15M
Cleaning medium: clean water (tap water)
Inlet pressure Min1.5bar/MX1bar
Filter Level 3 (coarse filter+fine filter)
Dimensions 1140 * 860 * 1050mm

Application areas: Concrete buildings such as highways, dock buildings, dams, hydropower stations, tunnels, bridges, etc.