Detection of residual oxygen/carbon dioxide levels in Fandao electronic food packaging

only
use
O2 measurement

Residual Oxygen Package Master (RO-105S) Model for O2 Measurement

Remaining oxygen/carbon dioxide gauge
Reader (RO-105L)
Simultaneously measuring O2+CO2

Get to know within 30 seconds! Click on the video image to introduce the remaining oxygen meter
Link to video websites and play videos.

feature

In the past, it could be stored for up to one year (when unopened and stored horizontally at 0 to 30 ° C)
Even if it is not in use, it will deteriorate during storage due to the primary reaction, but it can now be stored as a backup sensor for up to one year. You don't have to worry about missing measurements due to sensor lifespan.
If you are unable to use the oxygen sensor after one year of use, we will provide you with a "split replacement" option, so you can use it for one year without purchasing any other items.

■ Easy to replace sensors
1. Pull out the oxygen sensor from the probe and insert a new sensor
2. Once the probe is connected to the main housing, the sensor replacement is complete.

High concentration O2 measurement is possible.
It is now possible to measure up to 85% O2. Even in
CO2 can be measured stably even in carbon dioxide gas, except for combustible gases.

To measure,
Please insert the injection needle into the one click sample and press the start button to start automatic measurement. The automatic stability judgment function displays a stable value in just 6 seconds.

■
Equipped with pressure sensors. If there is any blockage or other substance in the injection needle or tube during gas inhalation, we will notify you via message. This solution can be solved by replacing the parts on the website. For more information, please refer toBlockage inspection.
■ Guidance function
Display Japanese troubleshooting in an easily understandable way. It also displays a QR code, and you can view detailed instructions and videos in the website "Processing and Maintenance Information" on the link.
Memory function (300 results)
Press the memo button to store the previous measurement value. Reading history is also easy.
New Japanese/English switching function
Press the SEL key to switch between Japanese/English displays. It can be used in the same way abroad, even if you don't speak Japanese as your native language.

■
By increasing the suction power to improve sampling performance, even for reduced pressure samples, automatic suction can now be applied, which was previously only possible through manual syringe operation. Due to manual operation, there is no difference between operators and efficiency has also been improved!
<xhamex>Soft resin cups, trays, packaging, etc.

▲ PAGETOP

Just place it on top of the square type sampler (model: PO-3),
Just place it on top of the sample, circular type (model: PO-4), and due to its own weight, the packaging will be made into a hole. No need to bond rubber, improve work efficiency! There are two types of resin boards: square and circular. →Click here for detailed page

Gas collection glass tube (GS-2)
When a sample with a small amount of gas is present, the container can be opened underwater to collect and measure the sample gas. (Click on the image on the right to link to the video website)
→Usage Guide (PDF)

The measuring device (MA-300) can only connect the main packaging
Use a dedicated DO sensor (model: WA-BRM5, sold separately) to measure dissolved oxygen (DO) in liquids. Due to its use of a sealed specialized casing, accurate measurements can be made without excessive air contact.
→User Guide (PDF)（400KB）

You can use the accuracy check kit (SCK-R2)
The attached standard gas (spray tank) can easily check the accuracy of the oxygen meter
For those who want to easily check accuracy or keep records, this is the ideal choice.
→Click here for detailed page

This is a special case where storage boxes can be stored
The main body and accessories are shown in the photo and can be measured while still storing the host.

Printer (CBM-910 II-40)
Connect the RS-232C cable and print the measurement values.
*Printer cables are sold separately.