Japanese Fandao Electronic Organic Solvent Compatible DO Instrument B-506S

Accurate measurements can be made using the "Measurement Device for Organic Solvents (MA-300G-SL)", which minimizes contact with air to focus on accuracy when measuring organic solvents, as well as the Organic Solvent Oxygen Sensor (WA-BRP).

By directly immersing the oxygen sensor (WA-BRP) in a beaker or similar solvent, organic solvent measurement values can be measured, and maintenance after measurement is also easy to measure.

1. The main device does not include an "oxygen sensor" and a "measuring device for measuring organic solvents", and is sold separately.
2. The measurement of dissolved oxygen (DO) in organic solvents is based on saturation rate rather than absolute value. For more information, please refer toFrequently Asked Questions (FAQ) - About Measurement
Page. 3. Considering this, it is necessary to consult on standards and model selection. Link toConfirm the table to select the model

Organic solvent oxygen resistant sensor (WAGNIT) ®） Model: WA-BRP

①圈： FFKM（Perflo）

② Body: solvent resistant peep resin that can be dissolved in POM (multi gel) resin and ABS resin, and can be almost used with other chemicals other than concentrated sulfuric acid.
③ Temperature Sensor: Stainless Steel (SUS304)
④ Plate pressure ring: stainless steel (SUS304)
⑤ Separation membrane: PFA (Teflon)
*The cable part of the sensor is incompatible with organic solvents.

Example of using organic solvents (MA-300G-SL) with measuring equipment

Measurements are taken in a sealed glass measuring box, allowing for accurate measurement of organic solvents that are prone to dissolve oxygen. (Required sample size: 30-50 milliliters)
1) Pull the syringe and suck the solvent into the syringe.
② Switch the rooster to push the syringe backwards, and then pump the solvent into the sealed measuring box.
③ Measure the measuring box while applying flow rate on a solvent filled stirrer.
(Click on the image to enlarge)