EN085 Vibration Sensor

NegotiableUpdate on 02/21

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

EN085 Vibration Sensor Introduction: It mainly consists of a vibration velocity sensor and a transmitter module, combined into an integrated vibration transmitter, which can be used to monitor the vibration status of rotating machinery such as fans, water pumps, and coal mills. It converts the vibration velocity value (or displacement value) into an output standard 4-20mA current signal, which can be connected to PLC and DCS systems

Product Details

EN085 Vibration SensorBy integrating vibration velocity sensors, precision measurement circuits, and display circuits, the traditional "sensor ten transmission module" combined vibration measurement system has been realized, which is suitable for building an economical high-precision vibration measurement system. This transmitter can be directly connected to DCS, PLC, or other systems, making it an ideal choice for vibration measurement of factory equipment such as fans, pumps, and motors.

Installation position: Installed vertically or horizontally on the measured vibration point, fixed with the magnetic suction seat at the bottom of the transmitter.

EN085 Vibration SensorIt integrates vibration sensors and precision circuits to form a high-precision vibration measurement system, which is used to measure vibration equipment in various factories such as steam turbines, compressors, fans, motors, and water pumps. It converts the vibration velocity value (or displacement value) into a 4-20mA output. Can be directly connected to DCS, PLC or other devices.

Technical indicators:

1Measurement range: Frequency:10～300Hz
Amplitude:0～200um 0～500um 0～800um(Peak to Peak)
earthquake intensity:0～20mm/s 0～25mm/s 0～50mm/s(True Significant Value)

2Measurement accuracy: ±0.5level,Linear error ≤1%FS
3Measurement method: vertical or horizontal
4Output signal: Current output: 4～20mA(Load ≤1KΩ)
5Environmental temperature:-10～65℃ (relative humidity ≤85%）
6. Supply voltage:DC24V(Power consumption ≤3W）
7. Overall dimensions:35×75（mm）
8. Fixed screw hole:M10×1.5×10mm

9. Shell material: stainless steel

10. Weight:350g左右

11. Wiring method: brown connected to DC24V; Black connected to negative pole, blue connected to signal output 4-20mA;

EN085 振动传感器

Zhengzhou Hangke Instrument Co., Ltd

Main business: eddy current sensors, vibration sensors, tachometers, integrated vibration transmitters, integrated eddy current sensors, pressure transmitters, temperature sensors, speed sensors, shaft vibration transmission protection meters, shaft vibration monitoring instruments, shaft displacement monitoring instruments, portable vibration meters, thermal expansion sensors, vibration temperature combination probes, three parameter combination probes, four parameter combination probes