-
E-mail
412776183@qq.com
-
Phone
18838113686
-
Address
Longzi Lake, Zhengzhou City
Product Categories
- Electric sludge discharge valve
- Electric three-way ball valve
- Pneumatic angle seat valve
- Explosion proof electric control valve
- Pneumatic hard seal ball valve
- Pneumatic high-pressure welded ball valve
- Electric flange butterfly valve
- Pneumatic fluorine lined ball valve
- wafer type butterfly valve
- Pneumatic high-temperature ball valve
- solenoid valve
Henan Hongsen Valve Industry Co., Ltd
Electric three-way ball valve
NegotiableUpdate on 02/07
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
HSD03122080 electric three-way ball valve This product adopts an L three-way ball valve body, with a valve drive stroke of 90 ° C; Rotate 90 counterclockwise; The middle road is connected to the left road, and the middle road is closed to the right road. Rotate 90 degrees clockwise; The middle road and the right road are connected, and the middle road and the left road are closed. $r $n adopts 90&# 176; Angular stroke electric actuator. The actuator pulls the gear through the motor, driving the sleeve to perform 90&# 176; Running in both forward and reverse directions.
Product Details
Electric wire mouth L-shaped three-way switch to ball valveProduct Information
HSD03122080Electric three-way ball valveAdopting an L three-way ball valve body, the valve has a driving stroke of 90 °. When turned counterclockwise by 90 °, the middle and left roads are connected and closed, while when turned clockwise by 90 °, the middle and right roads are connected and closed.
Adopting a 90 ° angle stroke electric actuator. The actuator pulls the gear through the motor, driving the sleeve to perform 90 ° forward and reverse rotation,
The valve is connected to the sleeve to drive the three-way ball valve to switch between the middle air duct and the left and right pipelines.
HSD03122080Electric three-way ball valveUsed for gas filling in tank bodies, controlled by pressure sensing,
When the gas on the left side of the tank is consumed to the set pressure, the sensor provides electricity toElectric three-way ball valveAfter the electric actuator receives the signal, the motor reverses and drives the valve to start reversing. (The actuator is equipped with a micro switch and a cam block inside. The micro switch is normally open (closed and powered off).) When the left pipeline of the valve is connected to the middle pipeline and the right pipeline is connected to the middle pipelineWhen cutting off, the cam stopper touches the micro switch, and the micro switch closes. The electric valve is in a power-off state, and gas is continuously transported to the left side of the tank through the middle of the valve.
When the gas on the right side of the tank is consumed to the set pressure, the sensor provides electricity toElectric three-way ball valveThe electric actuator receives the signal and the motor rotates forward, driving the valve to start rotating forward. The actuator is equipped with a micro switch and a cam stopper inside. The micro switch is normally open (closed and powered off). When the right pipeline of the valve is connected to the middle pipeline and the left pipeline is cut off from the middle pipeline, the cam stopper touches the micro switch, and the micro switch is closed. The electric valve is in a power-off state, and gas is continuously transported to the right side of the tank through the middle of the valve.
