Environmentally friendly horizontal desulfurization circulating pump

NegotiableUpdate on 03/28

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The environmentally friendly horizontal desulfurization circulating pump can handle slurries of different concentrations, temperatures, and corrosivities, meeting diverse working conditions. The horizontal layout facilitates maintenance personnel to access various components, shortens maintenance time, and reduces labor costs.

Product Details

Environmentally friendly horizontal desulfurization circulating pumpApplication advantages

Efficient and energy-saving: Optimize hydraulic model design, reduce energy loss, and lower operating costs.

Strong adaptability: It can handle different concentrations, temperatures, and corrosive slurries to meet diverse working conditions.

Convenient maintenance: The horizontal layout facilitates maintenance personnel to access various components, shortens maintenance time, and reduces labor costs.

Long lifespan: Made of wear-resistant and corrosion-resistant materials with reliable sealing design, it extends the service life of the equipment and reduces the frequency of replacement.

Environmental compliance: Efficient desulfurization capability helps enterprises meet emission standards and comply with the requirements of green and sustainable development.

Environmentally friendly horizontal desulfurization circulating pumpMaintenance methods for each component:

1. Shaft seal section:

The packing shaft seal pump needs to be regularly tested for sealing water pressure and water volume, and a small amount of clean water should always be kept flowing along the shaft. The packing gland should be adjusted regularly, and the packing should be checked and replaced regularly. The water pressure and water volume of the shaft seal should meet the requirements of the shaft seal inspection.

2. Impeller section:

In order to ensure efficient operation of the pump, it is necessary to adjust the clearance between the impeller and the front guard plate in a timely manner. When adjusting the clearance between the impeller, the pump should be stopped first, the bolts that press the bearing box should be loosened, the adjustment nut should be loosened, and the bearing assembly should be moved forward. At the same time, the shaft should be rotated by hand according to the direction of rotation of the pump. The desulfurization circulating pump should be rotated until the impeller rubs against the front guard plate, and then the adjustment bolt should be used to move the rotor backward. The clearance should be recorded and evenly distributed between the front and rear guard plates of the impeller until the clearance between the impeller and the front and rear guard plates. And tighten the two dust discs and fasten them onto the shaft. After adjustment, it is necessary to recheck whether the impeller rotates normally and whether the bearing component clamping bolts are tightened before starting the pump again.

3. Bearings require lubrication:

When assembling bearing components, if the assembly is correct, the lubricating oil is appropriate, and maintenance is timely, the transportation life will be longer. So maintenance personnel should regularly inspect the bearing components, check the condition of the bearings and lubricating oil, and regularly add or replace lubricating oil during operation, adding lubricating oil reasonably and timely.

4. The standby pump of the desulfurization circulating pump should rotate the shaft 1/4 turn per week to ensure that the bearings are evenly subjected to static loads and external vibrations.