Fully automatic suction filter in stock

Fully automatic suction filter in stockAdopting a structure of reverse flushing and electric brush discharge, it has the advantages of large filtration area, small equipment volume, compact structure, high filtration efficiency, flushing *, and low water consumption; And filtration and sewage discharge are carried out simultaneously, without affecting or interrupting the normal use of the system. This product can be widely used in fields such as petroleum, steel, food, chemical, machinery, pharmaceuticals, electricity, agricultural sprinkler irrigation, municipal, mining, and sewage treatment.

Fully automatic suction filter in stockApplication field

Industrial water treatment: Filtration of cooling water in industries such as steel, chemical, and power to prevent scaling of heat exchangers and improve equipment efficiency.

Municipal water supply: Pre treatment of drinking water to remove suspended solids and ensure water quality safety.

Agricultural irrigation: Filter impurities in irrigation water, avoid nozzle blockage, and improve irrigation uniformity.

Commercial buildings: Central air conditioning circulating water filtration protects refrigeration units and reduces energy consumption.

Special industries: Food, pharmaceutical, electronics and other industries that require high water quality to ensure pollution-free production processes.

Installation and Usage

Power configuration:

Please select a power socket according to the voltage and power indicated on the nameplate, and connect a wire of 1.5mm2 or larger to the power inlet terminal at the bottom of the electrical control cabinet.

Installation and installation precautions:

1. The direction of the arrow on the body is the direction of water flow, and the filter should be installed in this direction, that is, the direction of water flow in the system should be the same as the direction of the arrow * and should not be reversed.

2. There are three installation methods for the filter, as shown in the figure, but attention should be paid to the correct direction of water flow. During installation, the hydraulic control valve should be placed in a horizontal or downward position as much as possible to ensure proper drainage.

3. Filters should be installed in series in the pipeline system. To ensure uninterrupted water supply during filter maintenance during shutdown, a bypass should be installed in the system. Cut off ball valves such as globe valves and butterfly valves should be installed at the inlet and outlet of the filter as well as the bypass.

4. The selection of filter specifications should follow the principle of flow matching. When the flow rate of a single filter cannot meet the requirements of the pipeline, two (or more) filters can be installed in parallel

5. The filter should be installed before the water equipment that needs to be protected in the system

6. Check valves should be installed at the outlet of the filter in areas where backflow may occur.