GPS series high-frequency vibrating screen

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Introduction to GPS high-frequency vibrating screen GPS series high-frequency vibrating screen (high-frequency screen) is used to separate solid and crushed ores, with a particle size of about 200 μ m, suitable for wet and dry raw materials

Product Details

Introduction to GPS high-frequency vibrating screen

The GPS series high-frequency vibrating screen (high-frequency screen) is used to separate solid and crushed ores, with a particle size of about 200 μ m, suitable for wet and dry raw materials. The frequency of the vibrating screen is mainly controlled by an electromagnetic vibrator installed above the vibrating screen and directly connected to the surface of the vibrating screen. High frequency vibrating screen (high-frequency screen) has high efficiency, small amplitude, and high screening frequency.

Structure of GPS high-frequency vibrating screen

High frequency vibrating screen, abbreviated as high-frequency screen, is mainly composed of a screen box, exciter, suspension (or support) device, and electric motor. The electric motor drives the spindle of the exciter to rotate through a V-belt. Due to the centrifugal inertia force of the unbalanced weight on the exciter, the sieve box vibrates. By changing the eccentric weight of the exciter, different amplitudes can be obtained.

Characteristics of GPS high-frequency vibrating screen

No rotating parts, no need to add lubricating oil;
Simple structure, easy maintenance, low failure rate;
The vibrator utilizes the principle of resonance, operating in a critical resonance state with a dual mass, requiring low driving power and no large starting current during startup, resulting in low noise;
The excitation or amplitude of the high-frequency vibrating screen body can be adjusted, and the particle size of the screened product can be controlled by changing the excitation force of the screen body (adjusting the excitation);
At the same time as the sieve body vibrates, there is also relative vibration between the sieve strips of the sieve, and the gaps between the sieve strips are not easily blocked.

The purpose of GPS high-frequency vibrating screen

The high-frequency vibrating screen adopts a cylindrical eccentric shaft exciter and a bias block to adjust the amplitude. The material screening line is long, the screening specifications are diverse, and the excitation force is strong. It is widely used in product grading in industries such as mining, building materials, transportation, energy, and chemical engineering.

Selection Notice

When booking the GPS series high-frequency vibrating screen (for dehydration), in addition to specifying the model and quantity, it is also necessary to indicate the mesh size and mesh form.
The GPS series high-frequency vibrating screen (for dehydration) motor can be installed on the left or right side. If there are installation requirements, please specify, otherwise supply according to the provided installation diagram.
If the user has special requirements, our factory can provide non-standard design and production for the user.

Model Description:

model	Number of screening layers	Screen surface area m2	Sieve size mm	Vibration frequency Hz	Amplitude mm	Feed particle size mm	Processing capacity t/h	Motor model	Power kW	Equipment weight Kg
GPS1025	1	2.5	0.25-1	24	1.5	≤50	3~8	Y112M-4	2X4	2095
GPS1236	1	4.32	0.25-1	24	1.5	≤50	5~12	Y132S-4	2X5.5	3050
GPS1431	1	4.34	0.25-1	24	1.5	≤50	10~18	Y132S-4	2X5.5	3280
GPS1437	1	5.18	0.25-1	24	1.5	≤50	16~22	Y132S-4	2X5.5	3450
GPS1531	1	4.65	0.25-1	24	1.5	≤50	15~20	Y132S-4	2X5.5	3580
GPS1536	1	5.4	0.25-1	24	1.5	≤50	18~25	Y132S-4	2X5.5	3820
GPS1637	1	5.92	0.25-1	24	1.5	≤50	20~30	Y132S4	2X5.5	4015
GPS1837	1	6.66	0.25-1	24	1.5	≤50	23~40	Y132S-4	2X5.5	4425
GPS2036	1	7.2	0.25-1	24	1.5	≤50	25~50	Y132M4	2X7.5	5525
GPS2045	1	9	0.25-1	24	1.5	≤50	26~55	Y132M-4	2X7.5	6420