GY6-51 centrifugal induced draft fan

GY6-51 Boiler Centrifugal Fan Usage:
The GY6-51 boiler centrifugal fan is suitable for the air supply and introduction system of 2-670t/h steam boilers in thermal power plants, and also meets the requirements of high pressure head performance parameters for fluidized bed boilers. It is suitable for the air supply and introduction system of 2-670t/h steam boilers in thermal power plants, and also meets the requirements of high pressure head performance parameters for fluidized bed boilers. This series of fans can also be used for dust, mine ventilation, and general ventilation systems.
Requirements for GY6-51 boiler centrifugal fan:
The supply fan delivers air, while the induced draft fan delivers smoke or gas containing impurities. When the impurity concentration is less than 200mg/m ³, it can be used for more than 4 years. If it contains high impurities, it can also be used, but the service life will be shortened. The maximum operating temperature of the induced draft fan shall not exceed 250 ℃.
GY6-51 boiler centrifugal fan form:
Supply fans and induced draft fans are usually made as single suction. There are 20 machine numbers from 8D to 29.5D, totaling 40 specifications. Each type of fan can be made into two types: left-handed or right-handed. When viewed from one end of the motor and the impeller rotates clockwise, it is called a right cyclone machine, represented by "right", and vice versa, it is called a left cyclone machine, represented by "left". The position of the air outlet of the fan is represented by the angle of the outlet of the casing. The transmission mode of the fan is D-type, which is a cantilever structure. The connection between the motor and the fan adopts elastic coupling direct transmission.