Grid mechanical grid cleaning machine

Grid mechanical grid cleaning machineMain features

a) Simple structure and reliable operation;

b) Equipped with both motor drive and the self weight of the rake, it has strong cleaning ability;

c) Except for the grille components and tooth rakes, which are cleaned at the grille bar, all other parts are above the normal maximum water level, which is not easily corroded and easy to maintain;

d) Equipped with overload protection device to ensure the safe and reliable operation of the cleaning machine.
　

Working principle of GSP crawling grid cleaning machine

There is a fixed chain, a straight guide rail, and a circular guide rail surrounding the fixed chain on each side of the guide rail rack of the machine. The cleaning rake frame is fixed with two shafts. One axis is the guiding axis, with rollers installed at both ends, inserted into the straight guide rails on both sides respectively; The other shaft is the driving shaft, which is equipped with sprockets at both ends. The sprockets mesh with the fixed chain, and the sprocket head is inserted into the annular guide groove with a convex platform. A shaft mounted reducer is installed in the middle of the driving shaft. After the reducer is running, the cleaning rake is driven by the sprocket and constrained by the annular guide rail and the straight guide rail to perform a work cycle of downward movement of the tensioning rake, downward movement of the closing rake for slag removal, upward movement for slag transportation, and unloading.

Grid mechanical grid cleaning machineIt has a high degree of automation, high separation efficiency, low power consumption, no noise, and good corrosion resistance. It can ensure continuous and stable operation without human supervision. It is equipped with overload safety protection device, which will automatically shut down in case of equipment failure, thus avoiding overload operation of the equipment. This device can adjust the operating interval of the device according to user needs, achieving periodic operation; It can be automatically controlled based on the liquid level difference before and after the grille; And it has manual control function for easy maintenance. Users can choose freely according to different job needs.

At the same time, during the design process, take into account:
1. Foreign objects may enter the traction chain Lock the traction chain Therefore, a closed traction chain was designed
2. The underwater shaft components are made of stainless steel material Equipped with nylon bearings Eliminating daily maintenance of underwater components;

The sieve plate material is 304 stainless steel, and the equipment frame is customized according to the nature of the sewage. There are stainless steel and carbon steel materials available for customers to choose from.