Manufacturer of fully automatic grille cleaning machine

Manufacturer of fully automatic grille cleaning machineStructure and Principle
The grille is assembled from a set of * teeth rakes to form a rotating screen mesh, which is driven by a gearbox to rotate continuously. The lower part of the teeth raked screen mesh is immersed in water, and the floating dirt in the sewage is raked onto the screen mesh during the rotation process, brought out of the water surface. When it reaches the top, due to the guiding effect of the bending machine, adjacent teeth rakes produce relative turning operation, and most of the dirt falls off by its own weight. Some of the dirt stuck to the rake teeth is cleaned up by a specially designed nylon brush cleaning mechanism moving in the opposite direction.

Main Features
1. Low energy consumption, low noise, easy installation and maintenance;
2. Mechanical and electrical dual overload protection, safe and reliable;
3. The scraper mechanism composed of a rake tooth mechanism and a reverse rotating nylon brush has strong ability to remove dirt;
4. The electrical system is fully automated and equipped with a liquid level sensor control system, which can be connected with other equipment according to the requirements of the demand;

Grille cleaning machineScope of Application
1. Clean the debris on the fine grid between the pumping station and the inlet of the water supply and drainage project;
2. Solid liquid separation of industrial wastewater from textile, printing and dyeing, slaughtering, leather and papermaking industries;
3. Solid liquid separation in sugar production, brewing, and food processing.

Grille cleaning machineworking principle
This device is made of special shaped rake teeth made of ABS engineering plastic, nylon, or stainless steel, assembled in a certain order on the rake teeth to form a closed rake tooth chain, and its lower part is installed in the incoming canal water. When the transmission system drives the sprocket to rotate uniformly and directionally, the entire rake chain moves from top to bottom, carrying solid debris and separating it from the liquid. The fluid flows through the gaps of the rake teeth, and the entire working state continues.
Due to the special nodule shape of the rake teeth, when the rake tooth chain carries debris to the upper end and moves in reverse, there is a relative self-cleaning motion between the front and rear rakes, which causes the debris to fall off by gravity. At the same time, a pair of rubber brushes are set at the back of the equipment to ensure that each row of rake teeth can receive * cleaning effect when they move to that position.Manufacturer of fully automatic grille cleaning machineDirect sales;