Non clogging submersible sewage pump

NegotiableUpdate on 01/08

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The unobstructed submersible sewage pump can be equipped with a dual rail automatic coupling installation system according to user needs, which brings great convenience to installation and maintenance, and people do not have to enter the sewage pit for this.

Product Details

Non clogging submersible sewage pumpfeature

1. Can be used within the full head range while ensuring that the motor does not overload.

2. The design of deepwater high lift submersible sewage pumps reflects the requirement of high reliability everywhere.
Electric motor: Special insulation design ensures that the motor can still function normally in environments with minimal water ingress. The optimized design of the motor ensures that the water pump can start up in an environment where hydraulic components are partially submerged by sediment.

3. Sealing design: In order to meet the requirements of deep diving, multiple improvement measures have been adopted in the sealing of the water pump, including * sealing technology, which enables the water pump to operate at a depth of 100m underwater.

High power submersible sewage pumpProduct Usage
1. Enterprise wastewater discharge;

2. Municipal sewage treatment plant discharge system;

3. Subway, basement, civil air defense system drainage station

4. Wastewater discharge from hospitals, hotels, and high-rise buildings;

5. Sewage drainage stations in residential areas;

6. Discharge of slurry in municipal engineering and construction sites;

7. The water supply system of the water company

8. Wastewater discharge from breeding farms and irrigation of rural farmland;

9. Exploration of mines and supporting water treatment equipment;

10. Water supply and drainage in hydraulic engineering.

Non clogging submersible sewage pumpProduct usage conditions
1. The temperature of the medium shall not exceed 60 ° C, the weight shall be 1.0-1.3kg/dm3, and the pH value shall be within the range of 5-9.

2. For pumps without internal self circulating cooling systems, the exposed liquid level of the motor part shall not exceed 1/3.

3. In general, the pump must be used within the range of head to ensure that the motor is not overloaded. If it needs to be used within the full head range, it should be specified separately when ordering for the manufacturer to manufacture.

4. During operation, the current of the pump motor must not exceed the rated current of the motor