HH-1-2-4-6-8 Constant Temperature Water Bath Pot

HH-1-2-4-6-8 constant temperature water bath is widely used for distillation, drying, concentration, and impregnation of chemical or biological products. It is an ideal tool for laboratory technicians in various universities, environmental protection, scientific research, health, epidemic prevention, petroleum, metallurgy, chemical, medical and other units.

thisHH-1-2-4-6-8 Constant Temperature Water Bath PotThe water tank is made of high-quality stainless steel material for the inner pot, and the outer shell is made of high-quality cold-rolled plate spray painted. The inner pot and outer shell are insulated with glass wool for fast heating and energy saving. It is also equipped with a constant temperature regulator, and users can set the temperature according to their needs.

Usage:

When in use, water can be added according to the required capacity to shorten the heating time. (Be careful not to add too much water to prevent it from spilling out of the pot when boiling, and ensure that the water level in the pot is not lower than the sieve, that is, the electric heating tube in the pot should not be exposed to the water surface to avoid burning out the electric heating tube and causing water leakage). Connect the power supply, turn on the power switch, the indicator light will turn on, set the desired working temperature, and the green light will turn on to start heating. When the temperature reaches the set temperature, the red light will turn on to stop heating and keep the temperature within the set temperature range. The temperature control adopts two types: digital display and pointer. The digital display temperature control adopts a code based temperature setting, and the highest temperature is 99 ° C

Safe use of electricity:

This product uses 220V AC power, and the three socket must be properly grounded during use. The grounding wire can be welded to the water pipe or buried underground with a 2-meter long and 25mm diameter white iron pipe. Never connect it to the gas pipe..

　　HH-1-2-4-6-8 Constant Temperature Water Bath PotNotes:

1: Do not turn on the power before filling the pot with water, and cut off the power before draining.

2: To extend the service life of the instrument, please be careful not to let water enter the control box to prevent electric shock accidents caused by moisture. Causing electric leakage