-
E-mail
info@starvib.com
- Phone
-
Address
No. 19 Tongyang Road, Hai'an County, Jiangsu Province
Product Categories
Nantong Lianyuan Electromechanical Technology Co., Ltd
HS type fertilizer sieve
NegotiableUpdate on 05/06
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The structural characteristics of HS type fertilizer sieve: HS type fertilizer sieve is a circular vibrating screen, and its screen surface is driven by vibration through an excitation device, used for particle size classification of medium and fine materials
Product Details
Structural characteristics of HS type fertilizer sieve
HS type fertilizer sieve is a circular vibrating sieve, whose screen surface is driven by vibration through an excitation device, used for particle size classification of medium and fine materials.HS type fertilizer sieveIt consists of three parts: screening box, exciter, and support device. The sieve surface is installed on the sieve frame. The screen surface of the fertilizer sieve undergoes reciprocating vibration, using a dual axis inertia exciter and driven by two electric motors. Two sets of exciters operate synchronously in reverse to generate excitation force, drive the sieve mesh, force the material to undergo parabolic motion, and pass through the sieve layer by layer.
Characteristics of HS type fertilizer sieve
HS type fertilizer sieve is mainly used for grading various compound fertilizers and other bulk chemical materials. The HS type fertilizer screening machine adopts the new technology of ring groove nail and is equipped with rubber vibration balls under the screen, resulting in low vibration noise, high screening efficiency, and easy maintenance.
Selection Notice
- The HS type fertilizer screening machine is a single-layer machineScreen surface;
- The screen mesh is made of stainless steel wire woven mesh;
- The screening machine motor is installed on the left side. If it is changed to a right side installation, it can be designed separately.
- The installation angle of HS type fertilizer sieve can be changed as needed;
- The foundation bolt 16-M20 is provided by the user.
Example of Product Model Representation
Technical Specifications
model | Screen surface |
feeding granularity
（mm）
|
Processing capacity（t/h）
|
Vibration frequency（1/min）
|
double amplitude（mm）
| electric motor | ||||
area（㎡）
|
inclination（°）
|
Sieve size（mm）
| structure | model |
power（kw）
| |||||
HS1230 | 3.1 | 12 | 1.5-4.3 | knit | ≤100 | 25 | 900 | 6-8 | Y112M-4 | 4 |
HS1540 | 5.4 | 12 | 1.5-4.3 | knit | ≤100 | 45 | 900 | 6-8 | Y112M-4 | 7.5 |
model |
Overall dimensions Length x Width x Height (mm)
| Weight (kg) | Working load of each pivot point | The maximum dynamic load | ||
Feeding end (N) | Discharge end (N) | Feeding end (N) | Discharge end (N) | |||
HS1230 | 3325x2275x1780 | 1971 | ±415 | ±415 | ±2075 | ±2075 |
HS1540 | 4499x2675x1758 | 2723 | ±635 | ±635 | ±3175 | ±3175 |
Note: The processing capacity is based on the loose density0.95t/mFertilizer according to ³3mmFor the classification calculation of sieve holes, the content of particles smaller than half of the sieve hole size in the material is40%The content of particles larger than the sieve size is25%The screening efficiency is90%.
Installation dimensions of HS type fertilizer sieve
