HY-3015A Infrared Carbon Monoxide Analyzer

The HY-3015A infrared carbon monoxide analyzer is a measuring instrument for low concentrations of carbon monoxide, and can also detect carbon monoxide concentration, temperature, and humidity.

HY-3015A Infrared Carbon Monoxide Analyzer Product Introduction:

The HY-3015A infrared carbon monoxide analyzer is an instrument that uses the principle of infrared spectral absorption to measure low concentrations of carbon monoxide. It is an infrared carbon monoxide detector that can also detect carbon monoxide concentration, temperature, and humidity. Equipped with a very clear color touch screen, sound and light alarm prompts, built-in pump, and infrared carbon monoxide gas analyzer, it is widely used for gas detection and monitoring in public places, health supervision, environmental monitoring, and other areas. Successfully solved the issue, ensuring and compensating for high and low temperature measurements with extremely high accuracy, which can be used in monitoring departments such as scientific research. This instrument complies with the national standards of GB/T18204.2-2014 "Methods for hygiene inspection in public places" and GB/T9801-88 "Determination of carbon monoxide in air quality - Non dispersive infrared method", and conforms to the national metrological verification regulations of JJG635-2011 "Infrared gas analyzers for carbon monoxide and carbon dioxide".

HY-3015A Infrared Carbon Monoxide Analyzer Product Features:

1. Detect carbon monoxide gas in the air, as well as the temperature and humidity of the environment.

2. The built-in suction pump can suck gas from tens of meters away into the instrument for measurement.

3. Equipped with a large color touch screen, it is easy and fast to operate.

4. The instrument displays two types of data: PPM and mg/M ³, which can be automatically converted.

5. Automatic zero point correction technology, convenient for users to perform zero point correction in different seasons and times

Technical parameters of HY-3015A infrared carbon monoxide analyzer:

Detection principle: Non dispersive infrared gas analysis method/Non dispersive infrared method (national standard)

Gas detection: Carbon monoxide (CO) in the air

Testing method: pump suction

Measurement range: Carbon monoxide: 0.0-50ppm or 200 range; Temperature: -20 ∽ 60 ℃. Humidity: 10-95% RH

Automatic conversion of concentration display between ppm and mg/m3

Resolution: 0.1 × 10-6

Color touch screen operation, automatically stores 500 sets of data

Zero point automatic calibration technology with 485 data interface.

Linear error: ≤± 2% F · S, repeatability: ≤ 1.0%

Range drift: ≤± 2% F · S/3h

Response time: ≤ 60 seconds, preheating time: 30 minutes

Flow range: (0.5-2.0) L/min

Dimensions: 260 * 220 * 110 mm

Power supply: AC/DC dual-use, 220AVC (± 10%) or built-in rechargeable battery