Hardware warehouse explosion-proof switch lighting box main switch 100A1 wall mounted

NegotiableUpdate on 02/09

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Hardware warehouse explosion-proof switch lighting box main switch 100A1 wall mounted $r $n Technical description $r $n1, the shell of this explosion-proof box is welded with Q235 steel plate, and the surface of $r $n is electrostatically sprayed with plastic; The thickness of the box body is 6mm. When installing, wiring, and maintaining the box on site, it should comply with the requirements of GB 3836.15; $r$n3、 Protection level: IP66; Anti corrosion grade: WF1; $r$n4、 Entry and exit methods: bottom in and bottom out; $r$n5、 Installation method: Outdoor hanging type, equipped with rain cover $r $n6, flange 40 * 16 washing and waterproof sink

Product Details

Hardware warehouse explosion-proof switch lighting box main switch 100A1 wall mounted

Specification, model, technical parameters

BZC8050 EXDIIC T4 GB IP65 WF2 Outdoor

Install cabinet AC400V according to the diagram

MTXL-17 AC380V 38A 18.5kW requires technical docking drawings

400 * 500 * 140mm AC380V carbon steel 2mm internal configuration with dual power supply 63A/4P, 1 air switch 4P 63A

Install AC220V engineering plastic 3mm according to the drawing. Explosion proof grade: IICT4. Requirement: Install according to the drawing

1000 * 1000 * 2200 with drawings AC220V 50kW

Hardware warehouse explosion-proof switch, lighting box, main switch 100A1, wall mounted technical requirements

1. The shell is welded with Q235 steel plate,

Raw material: flange 40mmX20mm, shell plate thickness 6mm, shell cover plate thickness 14mm;

2. The surface of the shell is sprayed with plastic, and the color is Li Shi Hua;

3. The box cover is milled with a waterproof groove and sealed with an encrypted seal;

4. Hanging installation, both internal and external grounding are M8x30;

5. The limit deviation of unmarked tolerance dimensions shall be in accordance with GB/T1804-m;

6. Others will be produced according to the company's standard procedures.

7. Empty container with bottom plate

Specification: 720mm+820mm * 350mm with matching terminal blocks, with the inlet set at the top of the box, size: G2-1/2 inner wire interface. The back of the box is equipped with three explosion-proof grilles with a size of G1-1/4 for incoming lines. After the box is returned, the workshop will make its own holes.