High pressure blower for maintaining processed materials

High pressure blower for maintaining processed materials——Product Introduction

The fixed air function of the processed material plays a role in negative pressure adsorption. A representative example is the use in the printing industry, which utilizes the suction pressure of air to adsorb and fix printed materials. In the printing industry, the pressure and suction of a high-pressure blower from B&R are used to pile up papercartonSeparate items such as steel plates one by one, and there may be deviation during the printing process, which can facilitate the smooth progress of the printing process. They can be collected and transported. By using the suction force of the high-pressure blower from B&R, paper boxes, steel plates and other objects processed by the printing machine can be held on the rollers.

Beijiale high-pressure blower is a gas source conveying equipment that can be used to suction gas or to pressurize and transport gas. The fan impeller is directly installed on the motor rotor, and the pump shaft is mainly installed outside the compression chamber. The fan can also operate stably under large pressure differentials. Adopting a bearing front structure and dynamic balancing configuration, the product can be installed in multiple directions and can operate continuously, ensuring the stability of the fan in the working environment. The operating part has undergone dynamic balance correction, resulting in low vibration. The fan pump body is formed by die-casting and uses installation feet, which does not require high installation foundation requirements. Even low-power ones can operate without fixed feet, making it easy to use and saving installation costs and cycles;

Product characteristics of Beijiale high-pressure blower:

1. Shell material: The blower and motor shells are separately cast using die cast aluminum, which is hard and lightweight compared to iron shell fans. It can be made into a multi blade heat dissipation structure for heat dissipation.

2. Motor performance: Directly driven by a 2-pole low-noise motor with IP54 and F-class insulation, dual frequency wide voltage all copper motor, available at 50/60HZ, single-phase 110V/230V, industrial three-phase: 220/380/415/660V, etc. Users can choose a variable frequency motor for speed regulation according to their needs.

3. Fan oil seal: Beijiale high-pressure blower adopts rubber oil seal, which has stable performance. Use maintenance free shaft seals to separate the motor from the blower body and prevent foreign objects from entering and damaging the blower.

4. Fan bearings: High quality bearings are used for the important components of the high-pressure blower of B&R, with a speed of 4000 revolutions per minute and stable performance.

5. Muffler: Both the exhaust and intake pipes are equipped with silencers to reduce noise.

As a dual-purpose blower, the Beijiale high-pressure blower can not only be used for blowing air, conveying aeration, but also for air extraction and vacuum adsorption. Key points to note when using Beijiale high-pressure blower products:

1. During the operation of the Begale high-pressure blower, due to the work done on the gas, the kinetic energy of the gas increases, the wind speed is fast, and it rubs against the pump body, causing high temperature in the casing. It should not be touched to avoid burns.

2. The load current of the motor will vary with the air pressure used by the Begale high-pressure blower When wiring, an overload protection switch corresponding to the model should be equipped and used at the rated full load current (please refer to the nameplate on the motor for the rated full load current) to protect the motor.

3. When the air flow rate of the B&R high-pressure blower approaches a closed condition, the temperature will quickly rise. If this happens, the power should be cut off, the pipeline should be checked and cleared, and the dust inside the blower should be cleaned. Do not use the B&R high-pressure blower in a closed environment.

4. Hard objects such as dust, powder particles, fibers, and water droplets should be filtered out in advance, as they may enter the high-pressure blower of B&R with air. Generally, filters or filter buckets are used to remove them.

5. Regularly clean the inside and outside of the high-pressure blower of B&R (choose the cleaning frequency according to the working environment) to remove surface dust. Poor heat dissipation can lead to temperature rise, reduced air volume, increased vibration and other faults.

Title of this article:High pressure blower for maintaining processed materials