High pressure blower for welding exhaust gas suction

High pressure blower for welding exhaust gas suction

The Begale high-pressure blower is a blade type fluid machinery that can be used to suction gas and also to pressurize and transport gas. Its operating parts mainly consist of a rotating multi blade impeller and a stationary annular flow channel (i.e. pump body). According to the principle of centrifugal circulation, the impeller circulates and pressurizes in the air duct, generating high-pressure airflow as the impeller rotates. As a dual-purpose blowing and suction type, it can not only be used for blowing and conveying air for aeration, but also for air extraction and vacuum adsorption.

Product features of Beijiale high-pressure blower:

1. It has two uses: blowing and inhaling, which can be done with air suction or blowing;

2. Working with less oil, the output air is clean;

Compared to centrifugal fans and medium pressure fans, their pressure is higher;

4. The fan pump body is made of die cast aluminum material and equipped with mounting feet, making installation relatively convenient;

5. The noise level of the work is low, and compared to other similar products, the more obvious the power is, and it will be displayed above 5.5KW;

6. Less maintenance; High quality bearings are used for consumables, and within the warranty period, there is basically no need for protection;

7. The mechanical wear of the high-pressure blower from B&R is minimal, and its service life is also long.

8. The Beijiale high-pressure blower changes the pressure of the airflow by doing work, so that the performance of the airflow after entering the fan is between that of an axial flow fan and a high-pressure air pump.

Before leaving the factory, Beijiale high-pressure blower products undergo strict operation testing. You can use them as soon as you receive them. After the products are assembled, they are inspected and tested before being packaged and stored. For products that are taken out of the warehouse, they will be unpacked before shipment to recheck the product quality and operation.

1： Installation location: It must be installed indoors in a place that is not affected by wind and rain;

2： Environmental temperature: below 40 degrees Celsius;

3： Relative humidity: below 80%;

4： Air: If there are corrosive or flammable gases such as acids and alkalis in the air, they should not be transported by ordinary B&R high-pressure blowers as they may pose a danger. Explosion proof or corrosion-resistant B&R high-pressure blowers can be used instead;

5： Dust protection: It is not recommended to use it in places with a large amount of dust, powder, or fibers. If it is necessary to use it in such places, please install a filter and regularly clean the dust attached to the filter screen and the high-pressure blower of B&R;

6： Ventilation and heat dissipation: Please choose to use in a well ventilated area and do not use in enclosed rooms or boxes;

7： Storage space: For the convenience of routine maintenance or repair, please do not install in overly narrow areas;

8： Isolation vibration: Please install in a vibration free location; If the vibration in the venue is unavoidable, vibration reduction measures should be installed to isolate the high-pressure blower of B&R from damage caused by external vibrations.

Title of this article:High pressure blower for welding exhaust gas suction