Hydraulic driven self-cleaning filter

Hydraulic driven self-cleaning filterProduct features

Hydraulic driven self-cleaning filterWidely applicable to circulating or non circulating cooling water systems, heat exchange systems, central air conditioning systems, central heating systems, hot water boiler systems, industrial wastewater reuse treatment, municipal sewage treatment systems, etc. The large flow fully automatic filter has a large processing capacity and can be used in parallel to meet user needs, making it more suitable for industries such as steel, electricity, chemical, textile, printing and dyeing. The equipment requires that the water temperature flowing through the filter should not exceed 80 ℃.

Control method

Hydraulic driven self-cleaning filterThere are four control methods for cleaning and discharging, which are interlocked:
1. Differential pressure control: The control system compares the system pressure difference with the user set pressure difference in real time. When the system pressure difference is less than the set pressure difference, the filter machine performs filtration; When the system pressure difference exceeds the set pressure difference, the filter machine is cleaned and discharged.
2. Timing control: Users can set the filtering time and cleaning and sewage time according to the actual working conditions, and the filter will work in a cyclic manner according to the set filtering time and cleaning and sewage time.
3. Combination control of pressure difference and timing: Users can set the filtration time and cleaning and drainage time according to their actual working conditions. At the same time, the control system compares the system pressure difference in real-time with the pressure difference set by the user. The control system can clean and discharge pollutants based on the set cycle time and the received pressure difference signal, in the order of the received signals.
4. Manual control: When the high flow fully automatic filter is in manual control mode, press and hold the start button to clean and discharge the filter. Release the start button to stop cleaning and discharging.

Hydraulic driven self-cleaning filterfeature

1. The processing capacity is large and can be used in parallel, with a single machine processing capacity of up to 4000m3/h.
2. The default filtration accuracy is 200 microns, and can be selected from 200 to 3000 microns. It has a large filtration area and high pollutant holding capacity, and users can customize it according to actual working conditions.
3. Brush cleaning, with a long time interval between two cleaning and sewage discharge, has the characteristics of uninterrupted water supply during cleaning and sewage discharge, no need for bypass, short cleaning time, and low water consumption for sewage discharge.
4. Specially designed filter unit, sturdy and durable.
5. The cleaning design of * achieves low load, low water head, and uniform discharge function.
6. Equipped with motor overload protection, it can effectively protect the motor
7. Small footprint, equipped with lifting units and grab ladders for easy maintenance.
8. Strong maintainability, easy to install and disassemble.
9. LCD display interface, user-friendly design, easy to operate, no need for professional guidance.
10. The connection method with the user pipeline is flange connection, and the flange adopts national standard flange, which has strong universality.
11. Especially suitable for places with high impurity content and harsh working environments.