Spiral cleaner

NegotiableUpdate on 04/27

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Pipe supports should be installed near the pipe mouth on the inlet and outlet pipelines of the spiral cleaner equipment; A bracket should be installed under valves with a diameter greater than or equal to DN150 that are directly connected to the container mouth.

Product Details

Working principle of spiral cleaner:

According to the principles of centrifugal settling and density difference, when water flows tangentially into the equipment from the inlet of the desander under a certain pressure, strong rotational motion is generated. Due to the different densities of sand and water, under the combined action of centrifugal force, centripetal force and other forces, low-density water rises and is discharged from the outlet, while high-density sand particles are discharged from the bottom discharge outlet of the equipment. Compared to the current sand removers on the market, it has added a filtering unit (the filtering accuracy can be selected by the user), which has the advantages of high sand removal rate, space saving, low leakage rate for individual small particles, and stable working state.

螺旋除污器

The structure of this product * is similar to a spiral degassing valve. The specially designed spiral tube is located at the center of the spiral slag remover, which can create a static area inside the spiral slag remover, allowing all particles of different sizes to settle to the bottom of the equipment and gather in the sedimentation chamber.

When particles are separated from the system, the pressure drop of the spiral slag remover remains constant, so there will be no blockage. When the system is running normally, impurities can be discharged from the system through the drain valve. The device is equipped with a large impurity chamber, which only requires regular discharge.

★ Impurities can be removed during system operation;

The system can remove all impurities without maintenance or backup filters; (Can replace traditional cleaners)

★ No need for bypass valves or isolation valves, low pressure drop, will not hinder fluid flow;

Both large impurities and small particles can be removed;

★ Guaranteed for three years.

螺旋除污器

Spiral cleaner Installation precautions

1. The equipment must be installed horizontally, and attention should be paid to the direction indicated by the arrow during installation. The direction indicated by the arrow is the direction of water flow.

2. Due to the absence of moving parts and maintenance free operation of the device, the design and installation can be arranged according to the actual situation on site.

3. Pipe supports should be installed near the pipe mouth on the equipment inlet and outlet pipelines; A bracket should be installed under valves with a diameter greater than or equal to DN150 that are directly connected to the container mouth.

4. The inlet and outlet of the spiral slag remover are all made of national standard flanges. Valves must be installed at both the inlet and outlet of the equipment.

螺旋除污器

Instructions for Use:

During normal operation, it is necessary to open the inlet and outlet valves and close the drain valve.

2. Open the drain valve when discharging until clear water flows out.

After the discharge is completed, simply close the discharge valve.

If the discharge pressure is insufficient, the valve at the outlet can be closed.

During installation, attention should be paid to the direction of the pipeline and water flow.

6. The layout of the plan requires the management personnel to leave their operating space. Due to the absence of moving parts during the operation of the device, it is maintenance free. But it is necessary to maintain stable inlet load, evenly apply force to the opening and closing of the drain valve, and avoid human damage.