IS horizontal single-stage centrifugal pump, clean water booster pump

NegotiableUpdate on 04/24

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

IS horizontal single-stage centrifugal pump selection for conveying clean water or other liquids with physical and chemical properties similar to water, with a temperature not exceeding 80 ℃. The IS centrifugal pump is designed according to the national standard ISO2858 and manufactured according to the national standard SIO199/DIS. Compared with the old product, its technical indicators show an average efficiency increase of about 5% and a reduction of about 2% in cavitation allowance. It is an energy-saving and efficient product with stable performance and standardized component dimensions

Product Details

Horizontal single-stage pipeline pump for clean water, IS80-65-160, Manufacturer of clean water pump, model of booster pump

1IS horizontal single-stage centrifugal pump, clean water booster pumpProduct Introduction:

The IS type pump is a horizontal single-stage single suction centrifugal pump for clean water, while the IR type pump is a horizontal single-stage single suction centrifugal pump for clean water (with a maximum working temperature of 150 degrees Celsius), used for suctioning clean water and liquids with physical and chemical properties similar to water but without solid particles. It is widely applicable in industry, agriculture, urban areas, drainage, fire water supply, etc.

The IS pump system is designed according to the performance and size specified in standard I02858, and its technical standards are close to the standard, reaching a level. It is one of the energy-saving pump products promoted in China.

The pump body and pump cover of the IS centrifugal pump are divided at the back of the impeller, commonly known as the rear door structure, which has the advantage of easy maintenance.

The pump body and pump cover of the IS centrifugal pump form the pump chamber, while the impeller, shaft, and rolling bearings form the pump rotor components. The suspension bearing components support the rotor components of the pump, while the rolling shaft bears the radial and partial axial forces of the pump. In order to balance the axial force of the pump, most pumps are equipped with sealing rings at the front and rear of the impeller, and balance holes are provided on the rear cover plate of the impeller. Due to the low axial force of some pumps, there are no sealing rings or balance holes on the back of the impeller.

The structure of IS centrifugal pump is dry, reliable in performance, small in size, light in weight, good in corrosion resistance, low in power consumption, and easy to use and maintain.

IS centrifugal pumps have a wide range of universality, with 140 specifications in the entire series, but only four types of shafts are used: shafts of the same specification, bearings, shaft seals, impeller fasteners, etc. can all be interchanged; There are only four types of suspension for the entire series of pumps.

The rotational speed of IS centrifugal pumps is divided into two stages (2900 revolutions per minute) and four stages (1450 revolutions per minute).

The maximum flow rate of the second stage speed is 240 cubic meters per hour, and the maximum head is 125 meters.

The maximum flow rate of the fourth stage speed is 400 cubic meters per hour, and the maximum head is 55 meters.

The maximum working temperature is 80-150 degrees Celsius.

IIIS horizontal single-stage centrifugal pump, clean water booster pumpModel Definition

IS单级单吸离心泵型号定义

IIIProduct Features

1. IS centrifugal pump can transport water-based substances and various corrosive media (with viscosity similar to water)

2. IS centrifugal pump density range P=1.0-1.84 * 10 cubic kg/m ³

3. The temperature of the medium in the IS centrifugal pump is between -20 degrees Celsius and 160 degrees Celsius

4. The working pressure of the IS centrifugal pump system is less than 1.6 MPa. That is, the system pressure is equal to the suction inlet pressure plus the pressure when the pump valve is closed, which is less than 1.6 MPa

5. The flow rate of the IS centrifugal pump is 3.4-460m cubic meters/n, and the head is H3.6-132m. Special circumstances (high temperature, high pressure, and special materials) should be mentioned in advance when ordering to provide more reliable products.

4、 IS Clear Water Pump Parameter Performance

Model number Pump inlet outlet impeller mm-mm-mm	Import ← mm	Export → mm	Traffic volume m 3 /h	Head lift m	Equipped with motor		Impeller diameter mm
Model number Pump inlet outlet impeller mm-mm-mm	Import ← mm	Export → mm	Traffic volume m 3 /h	Head lift m	model	Power KW	Impeller diameter mm
IS50-32-125	50	32	12.5	20	Y90L-2	2.2	125
IS50-32-125	50	32	6.3	5	Y801-4	0.55	125
IS50-32-160	50	32	12.5	32	Y100L-2	3	160
IS50-32-160	50	32	6.3	8	Y801-4	0.55	160
IS50-32-200	50	32	12.5	50	Y132S 1 -2	5.5	200
IS50-32-200	50	32	6.3	12.5	Y802-4	0.75	200
IS50-32-250	50	32	12.5	80	Y160M 1 -2	11	250
IS50-32-250	50	32	6.3	20	Y90S-4	1.5	250
IS65-50-125	65	50	25	20	Y100L-2	3	125
IS65-50-125	65	50	12.5	50	Y901-4	0.55	160
IS65-50-160	65	50	25	32	Y132S 1 -2	5.5	160
IS65-50-160	65	50	12.5	5	Y802-4	0.75	200
IS65-40-200	65	40	25	50	Y132S 2 -2	7.5	200
IS65-40-200	64	40	12.5	12.5	Y90S-4	1.1	250
IS65-40-250	64	40	25	80	Y160M 2 -2	15	250
IS65-40-250	65	40	12.5	20	Y100L 1 -4	2.2	125
IS80-65-125	80	65	50	20	Y132S 1 -2	5.5	125
IS80-65-125	80	65	25	5	Y802-4	0.75	160
IS80-65-160	80	65	50	32	Y132S 2 -2	7.5	160
IS80-65-160	80	65	25	8	Y90L-4	1.5	200
IS80-50-200	80	50	50	50	Y160M 2 -2	15	200
IS80-50-200	80	50	25	12.5	Y100L 1 -4	2.2	250
IS80-50-250	80	50	50	80	Y180M-2	22	315
IS80-50-250	80	50	25	20	Y100L 2 -4	3	315
IS80-50-315	80	50	50	125	Y200L 2 -2	37	125
IS80-50-315	80	50	25	32	Y132S-4	5.5	125
IS100-80-125	100	80	100	20	Y160M 1 -2	11	160
IS100-80-125	100	80	50	5	Y90L-4	1.5	160
IS100-80-160	100	80	100	32	Y160M 2 -2	15	200
IS100-80-160	100	80	50	8	Y100L 1 -4	2.2	200
IS100-65-200	100	65	100	50	Y180M-2	22	250
IS100-65-200	100	65	50	12.5	Y112M-4	4	250
IS100-65-250	100	65	100	80	Y200L 2 -4	37	315
IS100-65-250	100	65	50	20	Y132S-4	5.5	315
IS100-65-315	100	65	100	125	Y280S-2	75	200
IS100-65-315	100	65	50	32	Y160M-4	11	200
IS125-100-200	125	100	200	50	Y225M-2	45	250
IS125-100-200	125	100	100	12.5	Y132M-4	7.5	250
IS125-100-250	125	100	200	80	Y280S-2	75	315
IS125-100-250	125	100	100	20	Y160M-4	11	400
IS125-100-315	125	100	100	32	Y160L-4	15	250
IS125-100-400	125	100	100	50	Y200L-4	30	315
IS150-125-250	150	125	200	20	Y180M-4	18.5	250
IS150-125-315	150	125	200	32	Y200L-4	30	315
IS150-125-400	150	125	200	50	YB250M-4	55	400
IS200-150-250	200	150	400	20	YB225S-4	37	250
IS200-150-315	200	150	400	32	YB225M-4	45	315
IS200-150-400	200	150	400	50	YB280S-4	75	400

IS centrifugal pumps are suitable for industrial and urban water supply and drainage, and are also commonly used in agricultural irrigation. Used for transporting clean water or other liquids with physical and chemical properties similar to water, the temperature of the transported liquid is not higher than 80 ℃, but when using an onboard seal, it can withstand high temperatures below 120 ℃. The allowable import pressure is 0.6MPa. The pump is installed horizontally, with horizontal axial suction and upward radial discharge. The IS centrifugal pump adopts a suspension structure, and during maintenance, the inlet and outlet pipelines do not need to be disassembled, and the rotor components can be removed for maintenance. The IS centrifugal pump is connected to the electric motor through a regular elastic coupling or an extended elastic coupling. The shaft seal of the IS centrifugal pump adopts soft packing seal or mechanical seal. The bearing is a single row radial ball bearing, lubricated with lubricating oil.