Imported high-pressure stainless steel flame arrester

　　Imported gas station flame arrester

　　Wode, GermanyImported high-pressure stainless steel flame arresterSuitable for flammable and explosive high-pressure gases such as CNG natural gas, hydrogen, oxygen, etc. It is made of forged steel, corrosion-resistant, and has a long service life, especially suitable for CNG compressed natural gas pipelines. It is a safety device used to prevent external flames from entering equipment or pipelines containing flammable and explosive gases, or to prevent flames from spreading between equipment and pipelines. It is used to prevent the spread of flames from flammable liquid vapors. Flame arresters are also commonly used on pipelines for transportation. If ignited, the gas flame will spread throughout the entire pipeline network. To prevent such danger from occurring, flame arresters should also be used. Flame arresters can also be used on pipelines with open flame equipment to prevent backfire accidents. But it cannot prevent open flames and liquid flames from burning.

　　Parameters of flame arresters for imported gas stations

Nominal pressure: PN16, PN32, PN40, PN50Mpa

Nominal pressure: PN16, PN32, PN40, PN50Mpa

Nominal diameter: DN3 to DN50

Nominal diameter: DN3 ~ DN50

The connection method can be welding, internal thread, or sleeve

Connection: welding, internal thread、Card sets

Outer diameter of welded pipe

∮10，∮12，∮14，∮16，∮18，∮20，∮22，∮25，∮28，∮30，∮32，∮40，∮42，∮50，∮57

Applicable media: pressurized natural gas (CNG), water, gas, etc

Suitable medium: CNG, water, gas etc.

Applicable temperature: -20 ℃~+120 ℃~70 ℃~180 ℃, etc

Applicable temperature: -20℃～+120℃ -70℃～180℃

Manufacturing materials: 20 #, 1Cr18Ni9Ti, 304, 316, 316L, 12Cr1Mov, etc

Material: 20 1Cr18Ni9Ti, 304, 316, 316L,12Cr1Mov etc.

In order to ensure the safe use of flame arresters, regular inspections and maintenance should be carried out.

1. The flame arrester should be inspected every six months to check whether the flame arrester core is blocked, deformed, corroded, etc.

2. The blocked fire-resistant layer core should be cleaned thoroughly to ensure that each hole on the core is unobstructed, and any deformed or corroded fire-resistant layer should be replaced.

3. When reinstalling the fire-resistant layer core, it should be ensured that the joint surface is tight and there is no air leakage.

Please contact the Ward valve agent for the product's external dimensions and dimensional structure diagram. Thank you! The size of the ordered product shall be based on the drawings provided by Ward Company or customized according to customer requirements.

If you need to consult more detailed product information

Welcome to contact the first level agent of WODE in Germany: Beijing Yongdebao Valve Co., Ltd