Industrial high-pressure blower -5.5kw high-pressure blower

Industrial high-pressure blower -5.5kw high-pressure blowerconfiguration

1. Shell material: The vortex fan adopts * degree die cast aluminum, which is the same aluminum material as the Mercedes Benz wheel hub. Compared with ordinary aluminum alloy, die cast aluminum is stronger and has a more lightweight effect compared to iron shell fans.

2. Motor performance:Vortex BlowerThe motor used is a wide frequency, wide voltage motor, listed as single-phase 110V/230V industrial three-phase: 220/380/415/660V, etc. The motor frequency can be adjusted from 45-75HZFrequency, IP55 protection level, F-class insulation level, its advantage is a process that domestic motors cannot achieve, and it is highly favored by domestic and foreign customers.

3. Fan oil seal:Vortex BlowerAdopting German MERKEL oil seal, made of fluororubber material that can withstand temperatures ranging from -25 ℃ to 300 ℃. Compared to the lip of a typical oil seal during operationThe temperature of the edge is 20-50 ℃ higher than the working medium temperature, which makes the performance more stable, maintenance free, and has a longer lifespan.

4. Fan bearings:Vortex BlowerThe core components use German SKF and Japanese NSK brand bearings, which can withstand 350 degrees Celsius and 4000 revolutions per minute. For domestic Luo axis, peopleCompared with this bearing, it has stable performance, low noise, maintenance free, longer service life, and can ensure longer operation of the fan.

Widely used in: liquid filling machine, powder filling machine, food, packaging, filling, glass products, paper cutting machine, environmentally friendly water treatment, * dust collection environmentProtection, automatic feeding machine, combustion oxygen reducer, filter forming machine, dust collector, environmental machinery, woodworking machinery, hot air generator, powder conveyor, kitchen machinery, dryer, incinerator, constant temperature box, mechanical cooling, and other industries.

The design of this vortex blower is more user-friendly, and can be customized according to customers' requirements and specially designed materials, which well meets customers' differentiated needs and has attracted more customers to choose Xinke blower. Unlike traditional fans, vortex blowers have undergone continuous technological improvements, greatly enhancing the bonding strength of their vacuum pump structure. The axis position of the impeller has been improved, and its resistance to external influences has also been enhanced, making it less likely to deviate from the axis position.

And a more important innovative design is the tight fit design between the vacuum pump chamber of the vortex blower and the concave flange of the side cover, which can effectively improve the operating strength of the fan and improve the deviation from the axis caused by screw fixation, greatly extending the service life of the all wind blower, making this product a choice for consumers when choosing a fan.

The impeller of the vortex blower, designed according to the regeneration theory, circulates and accelerates in the air duct, generating high-pressure airflow through the rotation of the single-sided and single-stage impeller. The impeller consists of 30 to 50 blades forming multiple air chambers. After entering these chambers, air is accelerated in both axial and radial directions. Driven by the rotating impeller, air enters the outer side of the annular chamber and the next air chamber. This cycle forms a vortex or a stretched spring. The speed energy continuously increases or is repeatedly generated, forming airflow at the suction and exhaust ports of the blower.

Industrial high-pressure blower -5.5kw high-pressure blowerPrecautions for use

1. The vortex blower generates high temperatures during use, so avoid touching the casing to prevent burns.

2. The motor load current will vary with the air pressure used by the high-pressure blower When wiring, an overload protection switch suitable for the model should be installed and used at the rated full load current (A) to avoid motor burnout. (Please refer to the nameplate on the motor for the rated full load current)

3. Please refer to the air volume static pressure curve chart in the catalog for the applicable range of continuous operation of the high-pressure blower, and use it within the curve range. However, if it is close to high pressure, do not exceed the applicable range. If it is necessary to approach the closed pressure during use, a pressure release valve should be installed in the pipeline. When the pipeline is closed, the pressure release valve will be released to regulate the air inlet and outlet to ensure the service life of the high-pressure blower.

If the high-pressure blower is operated in a closed pipeline, the temperature will rise sharply. At this time, continuous operation should be avoided, otherwise deformation or damage may occur. At the same time, the air volume in a closed condition or below the continuous use range will be limited. If it is intermittent operation, it must be operated by switching the air valve.

4. Changes in air temperature of vortex blower: When the air flow rate approaches a closed state, the temperature will rise sharply, so special attention should be paid to this situation. If the temperature rises, do not place the high-pressure blower in a sealed room for use.

5. Hard objects such as dust, powder particles, fibers, and water droplets should be removed before the air enters the high-pressure blower, and can be treated using dust bags or other methods. If a filter is installed midway in the pipeline, to avoid pressure reduction losses, please use a large-area filter and regularly clean the pollutants in the filter.

6. Regularly clean the inside and outside of the high-pressure blower (especially the air passage of the cooling fan) to remove surface dust. If a large amount of dust accumulates and the heat dissipation effect is poor, it will cause a temperature rise, a decrease in air volume, and an increase in vibration, leading to malfunctions.

7. Bearing oil seals and silencers are consumables, so they have a certain lifespan and need to be replaced regularly. At the same time, the metal mesh of the blade shell also needs to be replaced regularly according to the usage environment

If the vortex blower does not operate smoothly or produces abnormal noise during use, please turn off the power for maintenance.