Transparent medium pressure blower for laser engraving dust removal

NegotiableUpdate on 03/14

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Laser engraving dust removal with transparent medium pressure blower: Lubricating grease should be added or replaced irregularly according to the environmental conditions of use (lubricating grease does not need to be replaced during the service life of motor enclosed bearings). To ensure good lubrication of the fan during operation, the oiling frequency should not be less than 1000 hours/time. For enclosed bearings and motor bearings, ZL-3 lithium based lubricating grease should be used to fill 2/3 of the inner and outer rings of the bearings. It is strictly prohibited to operate without oil. The fan should be stored in a dry environment to prevent the motor from getting damp. When storing fans outdoors, rain protection measures should be taken.

Product Details

Transparent medium pressure blower for laser engraving dust removalFeatures:

1. Quality assurance, aluminum alloy heat dissipation shell, sealed dustproof design
2. Standing stock, timely delivery
3. Easy to install, can be installed in any horizontal or vertical direction
4. Low noise, both the inlet and outlet of the fan are equipped with high-efficiency built-in silencing pipes

5. Low maintenance, bearings, low mechanical wear, long-term no need for replacement

6. High temperature resistance, external bearing design, capable of withstanding high operating temperatures
7. Low vibration, special shock-absorbing foot design, greatly reducing the vibration generated during the operation of the fan
8. Wide range of applications, multiple product specifications, divided into high pressure and high air volume series, can be flexibly selected
9. Universal, all products have passed CE, CCC, UL certification, wide voltage dual frequency

Transparent medium pressure blower for laser engraving dust removal

Key points for use:

When the high-pressure fan is running, the current consumed by the motor will increase with the increase of pressure and vacuum degree. If the current is too high, it will cause the contactor to trip. To prevent tripping or save electricity, please increase the cross-sectional area of the air outlet as much as possible, or install a wind pressure and air volume regulating valve on the suction or exhaust side.
A、 For air supply - appropriate filters should be installed at the inlet
1. The total cross-sectional area of the air outlet should be greater than half of the cross-sectional area of the fan outlet.
2. If used for air delivery in water, the water depth pressure should be below 70% of the static pressure value indicated on the model catalog.
3. It is normal for the outlet temperature to be higher than room temperature by 10 degrees Celsius due to air friction during pressurized air delivery, so an iron pipe of at least 1M should be used.
B、 For suction - a silencer can be installed at the outlet
The total cross-sectional area of the suction hole should be greater than half of the inlet cross-sectional area of the blower.
C、 Simple cleaning method for filters:
Unscrew the self adapter of the filter and use an air spray gun or brush to remove dirt or dust from the filter screen. After cleaning, turn it back to use.