-
E-mail
kandy-ai@hn-jcm.com
-
Phone
15325713979
-
Address
No. 188 Nanhuashan Road, Si'an Town, Changxing County, Huzhou City, Zhejiang Province (Production Base)
Product Categories
Hangzhou Haina Environmental Protection Technology Co., Ltd
Industrial reverse osmosis membrane 80 type
NegotiableUpdate on 01/08
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The 80 type industrial reverse osmosis membrane is mainly used for desalination treatment of seawater and sub seawater. Widely used in small seawater desalination systems such as ships and islands.
Product Details
Industrial reverse osmosis membrane 80 type
By strengthening the membrane module structure, improving the hydrophilicity and charge of the membrane surface, the water production can be increased and the desalination rate can be high. The low energy consumption feature effectively saves users equipment investment and operating costs. Widely used for desalination of seawater, sub seawater, and high salt and high concentration brackish water.
Product advantages
Significantly reduce the investment and operating costs of seawater desalination equipment
Low energy consumption, high efficiency, stable and reliable performance
Excellent anti pollution performance under high salt and high concentration water quality conditions
A wider pH cleaning range reduces cleaning frequency
performance parameters
| performance parameters | model | Average water production m ³/d (gpd) | stable desalination rate | Low desalination rate | Effective membrane area m2 (ft2) | Inlet grid |
| SW-400-HRLE | 34(9,000) | 99.8 | 99.5 | 37.2(400) | 28 | |
| SW-440-HRLE | 36(9,500) | 99.8 | 99.5 | 41(440) | 28 | |
| test conditions | 32000ppm NaCl aqueous solution, pressure 800psi (5.5MPa), temperature 25 ℃, pH 7-8, recovery rate 8% | |||||
Industrial reverse osmosis membrane 80 typeInstructions
The flow rate of a single membrane element may vary, but the range of variation will not exceed ± 15%;
The stable desalination rate generally needs to be tested after 24-48 hours of continuous operation, depending on the inlet water quality and operating conditions.
