Injection molding machine dedicated isolation transformer

The dedicated isolation transformer for injection molding machines is mainly used to isolate harmonic functions in the power grid, mainly targeting the third harmonic of equipment. The primary and secondary are shielded with copper foil, effectively protecting the interference of power grid harmonics on equipment and better suppressing power grid harmonics. Especially suitable for mandatory applications of injection molding equipment and imported equipment.

Suitable for various three-phase power supply scenarios with AC 50-60HZ and input and output voltages not exceeding 1600V, using specifications between 1KVA and 1800KVA. The input and output voltage (three-phase or multiple input and output, etc.), connection method, tap position adjustment, winding capacity allocation, secondary winding configuration, and outer box (selected according to different usage environments) of the product can all be carefully designed and manufactured according to user requirements.

Product advantages:
1. High quality brand new cold-rolled oriented silicon steel sheets are stacked together; H-grade heat-resistant 180 ° enameled wire, with beautiful and elegant bare coil winding, primary and secondary air duct fan for fast heating, galvanized tripod, treated with special dipping process, vacuum dipping, oven drying! The introduction of new processes and technologies, such as effectively reducing vibration and noise during operation, increasing electrical strength, and using high-temperature resistant insulation materials, has made transformers more energy-efficient and quieter. The energy-saving and low-noise coil is equipped with ventilation slots, ensuring smooth air flow and quickly and effectively reducing coil temperature.
Characteristic parameters:

Capacity: 1KVA~1800KVA
Input voltage: 380V (or customized)

Output voltage: 380V (or customized)
Output waveform distortion: No distortion (compared to input waveform)
Insulation level: B level, F level, H level (usually F level), temperature resistance of 155 ° C
Applicable frequency: 50/60Hz
Connection method: Y/△ Y/Y
Noise: ≤ 35dB (within one meter)
Temperature rise: 135K
Insulation resistance: DC1000V, ≥ 10M Ω
Voltage withstand test: The wire package is grounded at AC3000V for 1 minute, with no breakdown or arcing

Design lifespan: 20 years
Working environment: Temperature: -20~+50 ℃ Humidity: ≤ 95% RH No condensation

No load output voltage: ± 2%

Efficiency: ≥ 98%

Workplace: No corrosive gases or conductive dust

Safety standards: The product complies with international national standards such as VDE0550, IEC439, JB5555, GB226, etc
Cooling method: dry air cooling
Stock availability: Customization required

Scope of application:

Injection molding machine equipment.