Integrated vibration intensity transmitter JMB35L

NegotiableUpdate on 02/25

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The integrated vibration intensity transmitter JMB35L and JM-B-35L integrate the vibration velocity sensor and precision measurement circuit together to form a high-precision vibration measurement system ..

Product Details

Integrated vibration intensity transmitter JMB35L

The integrated vibration intensity transmitter JM-B-35L integrates the vibration velocity sensor and precision measurement circuit together to form a high-precision vibration measurement system, realizing the function of the traditional "sensor+monitoring instrument mode vibration measurement system. The transmitter can be directly connected to DCS, PLC or other equipment, making it an ideal choice for vibration measurement of factory equipment such as fans, motors, water pumps, etc.

Technical Specifications
Power supply: 24VDC ± 10%
Input signal: taken from the signal of the built-in vibration speed sensor
Sensitivity: 20mv/mm/s ± 5%
Frequency response: 10-1000 Hz or 5-1000 Hz (special instructions)
Range: 0-20mm/s (true RMS)
0-200um (peak to peak)
Measurement error: ± 1% of full scale
Output current: 4-20mA
Output impedance: ≤ 500 Ω
Temperature range: -25 ℃ to+65 ℃ during operation
Storage time: -40 ℃~85 ℃
Relative humidity: up to 95%, non condensing
Dimensions: φ 33 × 75mm
Weight: Approximately 340g

Order code
XJ-9200A □□ (optional) - □□ (V/D) - A □□ - B □□ - C □□
Selection Guide
Optional: Waterproof connector □: F-Waterproof connector
Kaizhuang outgoing line □: B-Kaizhuang pipe
Required: Selection Description
Range □□:
Vibration velocity ranging from 10V-0 to 10mm/s; 20V*-0～20mm/s； 30V-0～30mm/s； ……
Vibration displacement ranging from 100D-0 to 100 μ m; 100D-0～200μm； 300D-0～300μm； ……
Installation direction A □:
1- Level; 2- Vertical; 3 * - Universal
Install thread B □:
1*-M10×1.5； 2-M8×1.25； 3- Magnetic seat; 4- Special customization
Cable length C □:
1-1m； 2*-2m； 3-3m； ……
Unless there are special circumstances, the manufacturer produces according to each item; If you have any special requirements, please consult with our company
Selection example: XJ-9200A-20V-A3-B1-C2
Integrated vibration intensity transmitter JM-B-35L

Flexible 4mA to 20mA loop power supply pressure sensor transmitter with integrated voltage or current drive

Advantages and Characteristics

4-20mA Looppower supplytransmitter

Voltage orcurrentdrive

optimizeenhance

improverefine

　　pressure sensor8226

Used in this circuit

product

ADA4091-2ADR02Application:sceneinstrumentation and meters

and

intelligencetransmitterCircuit functions and advantagesThe circuit shown in Figure 1 is a robust and flexible loop supply currenttransmitterThe differential voltage output of the pressure sensor can be converted into a current output of 4 mA to 20 mA. This design is optimized for various bridge voltage or current driven pressure sensors, using only 4 active devices with a total unadjustable error of less than 1%. looppower supply

The voltage range is 12V to 36V. The input of this circuit hasESDThe protection function and the ability to provide voltage protection above the power rail are ideal choices for industrial applications.Figure 1. Robust Loop Power Supply Pressure

sensor