Integrated vibration transmitter HZD-B-8B-SH

NegotiableUpdate on 02/12

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The integrated vibration transmitter HZD-B-8B-SH is equipped with a built-in magneto electric sensor to sense vibration velocity. Through high-precision integrated circuits, the magneto electric sensor converts the velocity peak/effective value into a corresponding range of 4-20mA current output. It is very suitable for connecting to DCS and PLC systems. It can also provide dynamic signal output. The frequency response characteristics of the transmitter are excellent; High measurement accuracy; And it is equipped with high temperature impact protection, overload protection, and reverse wiring protection; Multiple vibration range options are available; Configure multiple installation threads

Product Details

1、 Product Overview:Integrated vibration transmitter HZD-B-8B-SH

The integrated vibration transmitter HZD-B-8B-SH is mainly composed of a vibration sensor and a transmitter module, combined into an integrated vibration transmitter. It can be used to monitor the vibration status of rotating machinery such as fans, water pumps, and coal mills. It converts the vibration velocity value (or displacement value) into an output standard 4-20mA current signal and can be connected to PLC, DCS systems, etc. The transmitter adopts a two-wire connection method, making wiring simpler and more convenient. Integrated structure. The joints are made of stainless steel material, which is sturdy, durable, heat-resistant, impact resistant, waterproof and resistant to harsh environments. Multiple installation methods and vibration ranges can meet the application requirements of various occasions.

2、 Technical parameters:

1. Measurement range: 0~500um

2. Output current: 4~20mA

3. Working voltage: 24VDC

4. Frequency response: 5-1000Hz

5. Measurement direction: vertical or horizontal

6. Environmental temperature: -40 ℃~80 ℃

7. Protection level: IP67

8. Installation thread: M10 * 1.5 * 10 (depth)

3、 Wiring instructions:

2. Blue: signal output 3. Shielded wire grounding 1. Brown:+24VDC

*The signal line connection requires the use of two core shielded cables.

Install vertically or horizontally on the tested point, and tighten the bottom screw of the sensor to the tested housing.