Vibration transmitter XT-1

Vibration transmitter XT-1

Vibration transmitter XT-1After being connected with XZD-W vibration monitoring instrument or XZD-L vibration intensity monitoring instrument, various displacements, velocities, etc. can be measured. The vibration of the rotor supported by rolling bearings is transmitted to the bearing cover. The XT-1 vibration velocity sensor installed on the bearing cover cuts the magnetic field lines through the internal motion coil and outputs voltage, providing signals to the monitoring instrument for predicting and alarming mechanical faults.

Installation position: Installed vertically or horizontally on the measured vibration point, the bottom of the sensor is fixed with screws or magnetic seats.

Technical Specifications:

Sensitivity: 20-50mV/mm/S ± 1% (adjusted by the user)

Explosion proof level: Ex ia IIC T4 Protection level: IP65

Frequency response (optional): 5-100 Hz, 10-500 Hz, 10-1000 Hz

Natural frequency: about 10Hz

Amplitude limit: 2mm (peak to peak)

Maximum acceleration: 10g

Installation method: vertical or horizontal

Temperature range: -30 ℃ to 120 ℃

Relative humidity: up to 95% non condensing

External dimensions: φ 25 × 58mm

Weight: Approximately 250g

Installation thread: M10 × 1.5