Japanese SMC stroke can read cylinder RDQB25-20M2A1-5NZ

Japanese SMC stroke can read cylinder RDQB25-20M2A1-5NZ

Customized specifications for series common specification products

Cylinder with guide rod

MLGC series

Built in precision locking cylinder compact

Can be locked in two directions

Any reciprocating stroke of the cylinder can be locked.

Maximum piston speed: 500mm/s

It can be used within the allowable kinetic energy range of 50~500mm/s.

Air cushion is standard equipment

When used at high speeds, it can absorb the impact at the end of the stroke.

Action position detectable

All models are equipped with magnetic rings for magnetic switches.

Precision locking cylinder with built-in locking mechanism and linear moving component with compact integration of guide rod

For detailed specifications of magnetic switches/magnetic switch units, please refer to → P.1719-1827.

categorySpecial functionsWire lead

Delivery methodindicator lightWiring (output)load voltageMagnetic switch modelWire length (m)Before the wire

Insert the plugSuitable for load DCACSuitable for cylinder diameter0.5

※ Wire length marked 0.5m without marking (e.g. M9NW)

1m M (例) M9NWM

3m L (例) M9NWL

5m Z (Example) M9NWZ

Unmarked N (example) H7CN

In addition to the models listed above, there are also suitable magnetic switches available

The magnetic switch with a plug in front of the wire is detailed in P.1784 and 1785.

D-A9 □, M9 □, M9 □ W, M9 □ AL magnetic switches are shipped in the same package (unassembled).

The non-contact magnetic switch of '○' is produced according to the order.

D-A9 □ V, M9 □ V, M9 □ WV type, and D-M9 □ A (V) type cannot be installed.

In the case of using magnetic switches, if there are situations where the quick change connector and speed control valve model cannot be detected at the end of the stroke, it should be confirmed by our company.

Japanese SMC stroke can read cylinder RDQB25-20M2A1-5NZ