KCB (2CY) type gear pump

Product Name: KCB (2CY) Gear Pump

Product Introduction

KCB, 2CY typegear pump(abbreviated as KCB, 2CY)Gear Oil Pump）Suitable for transporting various oils with viscosity below 300 C.s.t, such as crude oil, diesel, lubricants, animal and vegetable oils, etc. Copper gears can be used to transport low flash point liquids such as gasoline, benzene, etc. The medium temperature shall not exceed 70 ℃, and the operating temperature of the high-temperature resistant oil pump shall not exceed 300 ℃. The pump itself is equipped with a safety valve, which provides safety protection in case of overload. There are three types of shaft seals: skeleton oil seal, mechanical seal, and packing seal. Please specify when ordering.

Product Features

Gears have high hardness and strength after heat treatment, and are installed together with the shaft in a replaceable shaft sleeve for operation. The lubrication of all parts inside the pump is automatically achieved through the use of the output medium during pump operation.
Currently in the marketKCB (2CY) gear pump manufacturerMany, which is the best KCB (2CY) gear pump? KCB (2CY) gear pump produced by Dadonghai Pump IndustryPipeline centrifugal pumpThe models are very complete, welcome everyone to come for consultation and purchase.

Product Usage

1. This pump is suitable for transporting various oils, such as heavy oil, diesel, and lubricating oil. Equipped with copper gears, it can transport low point liquids such as gasoline and benzene. Our unit also produces stainless steel gear pumps that can transport beverages and corrosive liquids.
2. This pump is not suitable for use with hard particles or fibers. It is suitable for viscosity ranging from 5 × 10-5 to 1.5 × 103 m2/s. The temperature is not high at 70 ℃. If you need to transport high-temperature liquids, please use a high-temperature resistant gear pump, which can transport liquids below 300 ℃.
3. KCB explosion-proof gear oil pump (flowmeter) is suitable for transporting various oils with viscosity below 300C. s.t, such as crude oil, diesel, lubricating oil, animal and vegetable oil, etc. Copper gears can be used to transport low flash point liquids such as gasoline, benzene, etc. The medium temperature shall not exceed 70 ℃, and the operating temperature of the high-temperature resistant oil pump shall not exceed 300 ℃. The pump itself is equipped with a safety valve, which provides safety protection in case of overload. The shaft seal has a skeleton oil seal. There are three types of seals: mechanical seal and packing seal. Please specify when ordering.
4. The 2CY gear type oil pump is suitable for transporting various lubricating liquids, with a temperature not exceeding 70 ℃. If a high temperature of 200 ℃ is required, contact our unit and use high-temperature resistant materials with a viscosity of 5 × 10-5~1.5 × 10-3m2/s. This pump is not suitable for transporting corrosive, hard particle or fiber containing, highly volatile or low flash point liquids, such as gasoline. Benzene, etc. If the pump is made of stainless steel and can transport generally corrosive media, customers should add P (P represents stainless steel) after the prototype number when placing an order. ）

Model Meaning

performance parameters

model	Diameter of suction and discharge pipes (inches)	Discharge flow rate (L/min)	Discharge pressure (MPa)	Inhalation height (m)	Volume efficiency (%)	Equipped with three-phase asynchronous motor
						Power (KW)	model	Speed (synchronous) (r/min)
KCB-18.3 （2CY-1.1/14.5-2）	3/4 "	18.3	1.4 5	5	≥85	1.5	Y90L1-4	1500
KCB-33.3 （2CY-2/14.5-2）	3/4 "	33.3	1.45	5	≥85	.2	Y100L2-4	1500
KCB-55 （2CY-5/3.5-2）	1 "	55	0.33	5	≥85	1.5	Y90L1-4	1500
KCB-83.8 （2CY-5/3.3-2）	1.5 inches	83.3	0.33	5	≥85	2.2	Y100L2-4	1500
KCB-200 （2CY-12/10-2）	2 "	200	0.33	5	≥85	5.5	Y132S-4	1500
KCB-300 （2CY-18/6-2）	3 "	300	0.33	5	≥85	5.5	Y132M2-6	960/1000
KCB-483.3 （2CY-29/3.6-2）	3 "	483.3	0.33	5	≥85	7.5	Y132M-4	400/1500
KCB-633 （2CY-29/3.6-2）	4 "	633	0.28	5	≥85	11	Y160L-4	960/1000
KCB-960 （2CY-60/3-2）	4 "	960	0.3	5	≥85	18.5	Y180L-4	1500
2CY-100/3-2）	6 "	1666.6	0.3	5	≥85	30	Y250M-8	750
2CY-120/3-2）	6 "	2000	0.3	5	≥85	30	Y250M-8	750
2CY-150/7-2）	6 "	2500	0.7	5	≥85	55	Y315S-8	750