KJB corrosion-resistant and particle resistant clamp plate pump

NegotiableUpdate on 04/07

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

KJB corrosion-resistant and particle resistant clamp pump, the pump body is molded with plastic as a whole, which is reliable and thick. It is surrounded by a metal jacket on the outside, with a firm structure and stable operation, and can effectively prevent adverse effects such as aging of plastic molded parts caused by long-term outdoor operation. The overcurrent components are made of non-metallic materials such as UHM-WPE and PVDF, which are corrosion-resistant and wear-resistant. Although the pump has a semi open impeller, it benefits from its hydraulic design and has high efficiency. The use of particle resistant containerized double end mechanical seals, with installation dimensions in accordance with ISO2858/GB5652 standards. Corresponding flushing solutions can be configured according to customer needs,

Product Details

KJB corrosion-resistant and particle resistant clamp plate pump

The pump runs stably and has strong anti cavitation performance, especially suitable for acidic, alkaline and corrosive media containing particulate impurities. It has the advantages of high efficiency, energy saving, low noise and vibration, high reliability, and long service life, making it an ideal conveying equipment for chemical, acid washing, environmental protection, and sewage treatment.

KJB corrosion-resistant and particle resistant clamp plate pump

2. Four pole motor speed performance parameters

KJB耐腐耐颗粒夹板泵

Installation and precautions:

1Before installation, the pump and motor should be inspected to ensure that all parts are intact and free of debris inside the pump.

3Place the unit on the foundation and place a pair of wedge pads between the bottom plate and the foundation. Adjust the high-speed pads to align the level of the pump.

5When the inlet and outlet pipelines of the pump are rigid hard pipes connected to the pump, the center of the inlet and outlet pipelines should be consistent with the center of the pump inlet and outlet flanges, and expansion joints should be installed for soft connections. It is strictly prohibited to cause accidental damage by pulling or forcefully connecting import and export pipelines.

7The phenomenon of parallel connection of pump inlet pipelines should be minimized as much as possible. If parallel connection is necessary, the number should not exceed two, and the cross-sectional area of parallel pipelines should be bolded according to the number of parallel connections.

9To prevent debris from entering the pump, a filter should be installed at the inlet with a filtration area greater than the cross-sectional area of the pipeline3-4Twice.

11It is necessary to ensure that the cavitation allowance of the device is greater than that of the pump, and to consider pipeline losses and medium temperature.

12When the medium temperature is too high, cooling measures should be taken for the machine seal to prevent deformation,The static ring is cracked.

Instructions for starting, running, maintaining, and disassembling programs