Price of Xuancheng acid alkali resistant magnetic pump

The price of Xuancheng acid alkali resistant magnetic pump is $r $n, with one external test hole available for dynamic testing. Wide angle projection lighting equipment, using energy-saving fluorescent lamps. Multi layer vacuum glass window, explosion-proof type. Four sets of adjustable fixed shafts and movable wheels are attached. Freezing system and heating system: 1. Energy saving French Taikang compressor. Adopt environmentally friendly R44A cold coal. Nitrogen pressure leak testing for the entire pipeline system. Wave shaped finned forced air condenser. Slope type FINTUBE evaporator. Solenoid valve; Dry filters and other refrigeration components. Internal spiral KTYPE refrigerant copper tube. UTYPE high-speed electric heating tube provides rapid heating. $r $n stainless steel chemical magnetic pump

1、 Overview of Stainless Steel Chemical Magnetic Pump:
CQB type fluorine lined magnetic pump is a chemical process pump that applies modern magnetic mechanics principles and uses permanent magnets to achieve non-contact indirect transmission. When the motor drives the outer rotor (i.e. outer magnetic steel) assembly to rotate, the magnetic field lines pass through the isolation sleeve and drive the inner rotor (i.e. inner magnetic steel) assembly and impeller to rotate synchronously through the magnetic field. The medium * is enclosed in the stationary isolation sleeve, thus achieving the purpose of leak free pumping of the medium, solving the shaft seal leakage of mechanical transmission pumps. The fluoroplastic magnetic pump, whose overcurrent components are all made of fluoroplastic, has reasonable design, advanced technology, full sealing, leak free, corrosion resistance and other characteristics. Its performance has reached the advanced level of similar products in the world and has widely replaced imported magnetic pumps.
CQB type fluorine lined magnetic pump is an ideal pump for eliminating running, emitting, dripping, and leaking phenomena in chemical processes, eliminating environmental pollution, creating a "leak free workshop" and "leak free factory", and achieving safe and civilized production.
The ISG air conditioning pump runs smoothly and is easy to install. It has a lightweight structure, compact size, and can work outdoors. The standard medium temperature is 12 ℃. Product introduction: This series of pumps is developed and designed according to the ISO2858 standard, using a new hydraulic model and referencing relevant standards to become a substitute for the SG series pipeline pumps. The technical standards, performance parameters, testing methods, etc. adopted by it effectively adopt the ISO standards related to IS centrifugal pumps, and have basically the same performance parameters as IS centrifugal pumps. Its performance indicators all meet the design requirements. Product use: ISLQISW pump is made of cast iron precision casting. Its characteristic is that the motor and pump are coaxial, and the end cover is integrated, making the pump compact in structure, small in volume, light in weight, smooth in operation, easy to install, and can replace IS type, BA type and other centrifugal pumps. It is suitable for industrial and urban water supply and drainage, high-rise building pressurized water supply, garden sprinkler irrigation, cooling tower water supply, long-distance water supply, etc. It can circulate and pressurize cold and warm water and provide equipment matching, with a medium temperature of 8 ℃.

2、 Characteristics of Stainless Steel Chemical Magnetic Pump Products:
The design of CQB fluoroplastic magnetic pump not only has the advantages of compact structure, beautiful appearance, small volume, low noise, and reliable operation of ordinary magnetic pumps, but also all its overcurrent components are made of the world's most corrosion-resistant "plastic king" (fluoroplastic), and the isolation sleeve is made of special materials, which have high-strength mechanical properties and eliminate the magnetic eddy current phenomenon of ordinary magnetic pumps. Therefore, CQB fluoroplastic magnetic pump can continuously transport corrosive media such as acids, alkalis, oxidants, etc. of any concentration (strength) without damage. Applicable temperature: -30 ℃ -100 ℃. This series of magnetic pumps can be equipped with pump protectors to prevent damage to pump components or supporting motors caused by idle operation or overload of the unit.

FKN series counterflow open cooling tower FKN series - Compared with FBN series closed cooling tower, counterflow open cooling tower has the following disadvantages: it occupies a larger area and has higher noise (the closed tower uses low-noise fans and has less noise); Large amount of water replenishment (in summer, the daily amount of water replenishment required is 1/3 of the total water volume of the cooling tower); A large amount of water vapor evaporates, carrying away water molecules and reducing water quality; Easy to introduce impurities, rainwater, etc., prone to scale formation, and difficult to clean; The cooling effect is relatively poor (it can reach 41 ℃ in summer, and the closed tower can guarantee 332 ℃). The FKN series - countercurrent open cooling tower has a similar working principle compared to the FBN series countercurrent closed cooling tower. The difference is that the FKN series open cooling tower does not have cooling coils, which greatly limits the use of open towers in various industries; However, the investment cost of opening a tower is relatively lower compared to closing a tower.
3、 Purpose:
CQB fluorine lined magnetic pumps are widely used in chemical, acid, alkali, smelting, rare earth, dye, pharmaceutical, papermaking, electroplating, acid washing, radio, scientific research institutions, national defense industry and other units to pump acid, alkali, rare and valuable oil liquids, venom, volatile liquids. Especially for the pumping of liquids that are prone to leakage, flammable, and explosive. Choosing a matching explosion-proof motor is more ideal.

Applicable temperature: -20 ° C to 100 ° C.

The LNG low-temperature storage tank is a double-layer structure, which involves material inspection and acceptance, prefabrication, assembly, welding, testing, and cold insulation. There are many construction procedures and cross operations, and each link is closely linked during construction. The project schedule is tight and the tasks are heavy. The small plate thickness of the tank wall inside the storage tank is only 9mm, which is prone to welding deformation during welding. Effective anti deformation measures must be taken during construction to ensure good formation of the tank body. The inner tank of the storage tank is made of 6Ni9 material, and the welding materials are all nickel based welding materials. In addition, the inner tank wall is subjected to 1% RT testing. Therefore, it is required that the welder group has high quality, and welder training and assessment work must be done in advance before construction. There are many materials for the inner and outer tanks of the storage tank, and there are various types of welding materials, which require strict management of welding materials.