Kitchen waste treatment equipment, dryer

NegotiableUpdate on 05/24

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Kitchen waste treatment equipment dryer $r $n2, the drying process does not produce harmful gases, the temperature is low and does not produce secondary pollution. The drying process is only the process of water evaporation, reducing the air volume of water evaporation and the production of odorous gases, making it easy to handle; $r$n3、 It solves the common problems of building bridges in the drying of household waste, as well as issues such as inability to dry, low output, strong odor, severe secondary pollution, low efficiency, and high energy consumption. It ensures even drying of household waste, high output, and convenient final moisture control;

Product Details

The meal waste dryer is a specialized drying equipment developed by Jifeng Environmental Protection for the treatment and utilization of solid waste generated in people's daily lives, including tree branches, fabric fragments, plastic, iron, brick and stone blocks, wooden blocks, plant stems and leaves, etc. The moisture content of household waste is generally 30-70%. Depending on the purpose and treatment method, the required moisture content after drying is generally 15-30%. After drying, it is mainly used for incineration, boiler combustion, gasification power generation, etc. Due to the fact that the moisture in household waste is a combination of surface free water, cell water, interlayer water, and permeate water, surface free water is relatively easy to evaporate at a constant rate, while cell biological water interlayer water and permeate water are difficult to remove,

烘干机.jpg

Kitchen waste treatment equipment, dryer

Especially in household waste, the thickness of organic biomass increases the difficulty of removing moisture, which is a typical slow evaporation with slow deceleration, long drying time, difficult control, and prone to drying failure and burning phenomenon. Our company has carried out a comprehensive technical transformation of the dryer based on the characteristics of household waste materials, on how to remove some of the deep moisture inside the materials, improve the permeability of materials in the drying equipment, and the residence time and drying efficiency of household waste materials in the cylinder. We have adopted a new type of gas and heat conduction device, a lifting and dispersing combination device, which enables the waste materials to fully exchange heat, strongly dehydrate, greatly improve the heat utilization rate (up to 90% or more), increase production, and the moisture control can be adjusted arbitrarily and kept stable.