LCD glass cleaning machine high-pressure fan

LCD glass cleaning machine high-pressure fan

LCD glass cleaning machine high-pressure fanWith the continuous development of high-pressure equipment in our country, and the use of dedicated high-pressure blowers in cleaning equipment, there has also been better development, which has brought good impetus to major cleaning machinery and equipment enterprises in our country. The high-pressure blower equipment directly leads to the development of cleaning equipment in our country.

Fufeng high-pressure fancharacteristics

1. The aluminum shell of Fufeng fan is die cast, which is reliable in operation and durable.

2. Running with little or no oil, the air output of the Fufeng fan is clean, which can improve energy utilization efficiency.

3. Maintenance free use, its moving parts only have two bearings running after the motor is started.

4. Stable flow rate, high efficiency, and the use of blowing, spraying, and suction all have their effectiveness, and there is a relatively conservative design in the high-pressure range. Even when the usage situation changes, it still operates safely.

5. Mechanical wear is very minimal, and Fufeng fans have a long service life because they have no other mechanical contact parts except for bearings.

6. Low noise: Directly driven by a motor, the inlet and outlet of the Fufeng fan are equipped with built-in soundproof pipes, which can reduce the noise during operation.

7. Small in size, easy to install and use on various mechanical equipment.

Fufeng high-pressure fanPrecautions for use:

(1) Fans may generate high temperatures when used in high-temperature environments, so it is important to avoid touching the casing to prevent burns.

(2) The load current of the motor will vary with the air pressure used by the fan. When wiring, an overload protection switch suitable for the model should be installed and used at the rated full load current to avoid motor burnout.

(3) If the continuous operation range of the fan must be close to the closed pressure when in use, a pressure relief valve should be installed in the pipeline. When the pipeline is closed, the pressure relief valve will automatically open to regulate the air inlet and outlet to ensure the service life of the fan. If the fan is operated in a closed pipeline, the temperature will rise sharply. At this time, continuous operation should be avoided, otherwise deformation or damage may occur. When the air used is intermittent, use the air valve switching mode to operate.

(4) Hard objects, dust bags, particles, fibers, and water droplets should be removed before entering the fan, and can be treated with dust bags. If a filter is installed in the pipeline, to avoid pressure reduction losses, please use a large-area filter and regularly clean the pollutants in the filter.

(5) Regularly clean the inside and outside of the fan to remove surface dust. If a large amount of dust accumulates, the heat dissipation effect will deteriorate, which may cause temperature rise, reduced air volume, increased vibration, and lead to malfunctions.

(6) Bearings, oil seals, and silencing devices are consumables, so they have a certain lifespan and need to be replaced regularly. At the same time, blades, shells, metal mesh, etc. must also be replaced regularly according to the usage environment (mainly corrosive air flow, gas-liquid mixture, etc.).

(7) If the operation is not smooth or there is abnormal noise during use, please turn off the power for maintenance.

Application of Fufeng high-pressure fan

1. Air suction function: screen printing machine suction, welding exhaust gas suction, weaving machine silk suction, photographic plate making, powder conveying, printing adsorption, industrial vacuum suction, vacuum dehydration, book making machine, residual cloth treatment, milk carton filling machine, tofu machinery, processing material retention, construction site, ironing machine, gas decomposition.

2. Hair blowing function: gas and heavy oil spraying, bottle washing machine drying, paper and cloth strip blowing, air knife for drying, cutting machine air cushion, livestock manure fermentation explosion gas, particle conveying, electrolyte stirring, oxygen supply for aquatic ponds, convenient punching machine for taking formed products, powder and particle conveying, incinerator waste disposal, flue gas blowing and suction, car washing and drying, printing machine forced drying, washing and drying.

Our service philosophy:

1. Pre sales service: We provide you with detailed technical parameters of the fan, allowing you to select the fan that is more suitable for your use.

2. In sales service: Our dedicated service personnel will track the goods with you until they arrive safely in your hands.

3: Promote product performance and maintenance to users;

4: The company has sufficient spare parts to ensure that user equipment can receive timely maintenance and repair;

5: Consulting or visiting users' usage and keeping records, providing feedback to relevant departments;

6: The service principle is: Fufeng Company serves customers with excellent service, fast speed, and professional attitude.