Marine smoke analyzer

NegotiableUpdate on 03/07

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The testo 350 MARITIME marine smoke analyzer measures the emissions of diesel ship engines according to MARPOL Annex VI and NOx Technical Specification 2008.

Product Details

testo 350 MARITIME-Marine smoke analyzerCertified for emission measurement of marine diesel engines, it can be used to measure smoke concentrations of NO, NO2, SO2, CO, CO2- (IR), and O2. In order to meet the demanding requirements at sea, the complete smoke analyzer is placed in a sturdy transport protection box with small wheels - the marine testo 350 MARITIME smoke analyzer is not a gas analyzer used on land.

Marine testo 350 MARITIME smoke analyzer "full speed forward"

As a smoke analyzer suitable for navigation, the testo 350 MARITIME can be used for onboard detection operations in accordance with the NOx Technical Code 2008

Direct measurement and monitoring methods on board for long-term monitoring and real-time detection
Simplified measurement methods on board, such as adjusting and modifying parameters for the engine

The marine testo 350 MARITIME smoke analyzer is also suitable for checking the NOx limits specified in MARPOL Annex VI. Measurement verification of NOx under local or national regulations. For example, following the Norwegian NOx emission tax and demonstrating NOx reduction measures

Having the following certificates
Germanischer Lloyd (DNV GL) certificate number: TAA00001K0 (02/2018-02/2023), according to MARPOL Annex VI and NOx Technical Code 2008. Nippon Kaiji Kyokai (NK level) Japan Maritime Association certificate number: 14DD001B. In addition, testo 350 MARITIME complies with the Marine Equipment Directive and has the MED mark in compliance with standard 0098/2018.

testo 350 MARITIME-Marine smoke analyzerThe product includes

The marine testo 350 smoke analyzer is equipped with gas sensors such as O2, CO, CO2- (IR), NO, NO2, and SO2, as well as gas and processing units, differential pressure sensors, 2 temperature probe interfaces, data bus connection ports, fresh air valves, batteries, NTC combustion air temperature probes, trigger signal input terminals, data storage modules, USB interfaces, etc

● Marine testo 350 smoke analyzer manual operator V2
● Instrument protection box with rollers
Industrial engine specific sampling probe, built-in thermocouple and signal line, equipped with pre filter, fixed cone and insulation baffle, 335mm long, temperature resistant to 1000 ℃, 4m long sulfur resistant hose.
A 5-meter-long data bus connection cable is used to connect the handheld device and analysis box
● Fast infrared printer, including 1 roll of thermal paper and 4 batteries
Testeo 610 Temperature and Humidity Measuring Instrument
DNV certificate number TAA00001K0 Rev. 1
Nippon Kaiji Kyokai (NK) - Certificate Number: TA23536M
MED certificate numbers MEDB0000328 Rev. 3 (module B) and MEDD00002FU (module D)

Technical Specifications

weight	Approx. 17 kg
size	565 x 455 x 265 mm (case)
Operating temperature	5 ~ +45 °C
shell	ABS/ABS-PC glass fiber 10%
Connectable probes	1 x combustion air temperature probe; 1 x flue gas probe; 1 x temperature probe; 1 x temperature probe; 1 x differential pressure
Product colour	Black
standard	Germanischer Lloyd (DNV GL) Certificate Nippon Kaijik Kyokai (Class NK) certificate according to MARPOL Annex VI and NOx Technical Code 2008
power supply	Li ion rechargeable battery; AC mains unit 100 V to 240 V (50 to 60 Hz)
power consumption	max. 40 W
pump flow rate	1 l / min. with flow monitoring
Maximum positive pressure of flue gas	50 mbar
Maximum smoke negative pressure	-300 mbar
Dew point calculation	0.04 °Ctd; 99 °Ctd
data transmission	IR/IRDA 界面; Bluetooth®; USB 接口; data bus; trigger input; 差压; probe input/ probe inputs; DC-voltage input; Mains connection; dilution gas inlet for measurement range extension
Storage temperature	-20 ~ +50 °C