Mobile bag filter JLDL-1P2S

The JLDL-1P2S mobile bag filter consists of a high-quality filter, a delivery pump, and related controls. Specially suitable for batch material filtration, cross filtration or small batch and scattered material filtration can be carried out at several discharge points. The operation is convenient and flexible, and material filtration can be carried out by simply connecting the inlet and outlet and power source. Material 301/316, main components: filter, conveying pump, mobile platform and connecting pipe.

　　Mobile bag filter JLDL-1P2SAfter a period of normal filtration, when the filter cake layer on the porous wick reaches a certain thickness, a signal is provided to control the feeding (stop), and then the residual liquid in the filter is drained. After draining, a signal is provided to control the blowback port (compressed air, nitrogen or saturated steam) to blow back, causing the filter cake to fall off. After a certain period of blowback, the blowback is stopped and a signal is provided to open the filter slag discharge port for slag discharge. After the slag discharge is completed, the slag discharge port is closed, returning to the initial state before filtration and preparing for the next round of filtration.

　　Mobile bag filter JLDL-1P2SThe main advantages are:

When used for clarifying liquids, additives such as diatomaceous earth and activated carbon can be directly added to the slurry to increase filtration rate and clarify the filtrate. The accuracy range is from 1 μ m to 300 μ m.

Fully enclosed operation, suitable for filtering general materials, as well as for filtering hazardous products that are flammable, explosive, toxic, or highly toxic, as well as fresh foods, biological products, and drugs that are not allowed to be contaminated.

In the later stage of filtration, if the residual slurry at the bottom cannot be discharged back into the slurry tank, a pump can be used to extract the residual slurry at the bottom, and then return it to the top cover of the filter machine in the center, and evenly spray it onto the filter tube through the nozzle. Compressed gas is input into the machine to filter out all the residual liquid.

Due to the ability of this machine to form a uniform layer of filter cake during filtration, it is convenient to wash the filter cake by introducing detergent into the machine. If the filter cake is washed by top spraying, it can greatly save washing solution.