Natural gas dew point meter

NegotiableUpdate on 02/14

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The Easew Professional I.S. natural gas dew point meter is a robust and internally safe 2-wire dew point transmitter for measuring trace amounts of moisture in liquids and gases. This is certification, which can be used in Class 1, Group 1, Groups A, B, C, and D, EXII 1G, pre ia IIC T4, and is a 1 ABCD (large=+60&D); #176; C) The location of the danger zone.

Product Details

Natural gas dew point meterhighlight

· ±1°Cprecision

·Measure moisture in gases or liquids

·Two wire connection

moisture contentppm_V orppm_W output

Easidew PRO ISNatural gas dew point metertechnical indicators

performance
Humidity range	-100 ~ +20°Cdew point
Humidity accuracy	±1°Cdew point(+20 ~ -60°C) ±2°Cdew point(-60 ~ -100°C)
response time	T95For five minutes (from dry to wet)
repetitiveness	0.5°Cdew point
output/input
output signal	4-20 mA (Two wires, current source)Full range setting
output	the dew point,ppm_V ，ppm_W
Output range	the dew point:-100 ~ +20°C Moisture content in gas:0-3000 ppm_V Moisture content in liquid:0-3000 ppm_W
power supply voltage	12-28 V DC
Resistive load	250 ohms @ 12 V；500 ohms @ 24 V
current consumption	23 mA, depending on the output current
Saturation constant (For measuring moisture in liquids only)	3000 ppm_W Dedicated for saturation constants within6Point data query table, covering temperature range0 ~ 50°C. 8 The saturation constant of common liquids can be edited in the sensor through application software.
Working condition requirements
Operating Humidity	0–99.99% RH
Operating Temperature	-40 ~ +60°C
work pressure	45 MPa (450 barg)
traffic	Installed in a standard sampling sleeve,1 ~ 5 Nl/min; Direct insertion type,0 ~ 10m/sec
mechanical properties
Dangerous Place Certificate	ATEX - Ex II 1G EX ia IIC T4 FM - I.S. I 1 ABCD T4 (Ta = +60°C) CSA - IS Class 1 Div 1 Groups ABCD T4 IECEx - EX ia IIC T4 (-20°C, Ta < +60°C)
Sealing protection level	IP66Corresponding to the standardBS EN 60529:1992；NEMA 4Corresponding to the standardNEMA 250-2003
Shell material	stainless steel
filter	80 µmSintered protective cap,HDPEprotective cap
Mounting Thread	5/8' - 18 UNF
weight	1.27kg
electrical connection	Threaded compression terminal, M20 x 1.5mm
Error message(appearance settings)	Refer to the table
Verified supporting safety barriers	KFD2-CR-EX1.20200 KFD2-CR-EX1.30200 KFD0-CS-EX1.50P KFD0-CS-EX2.50P KFD2-STC4-EX1.H MTL5041, MTL5040