PERMA-CAL pressure gauge 101FTM15R21

101FTM15R21， 4.5 'dial, 0-5000 psi, ¼' NPT, bottom mounted, stainless steel connection, red front flange. Perma Cal industrial pressure gauges can be used in harsh environments, are durable, and can withstand severe vibrations, impacts, pulsations, and overpressure. Therefore, Perma Cal pressure gauges are suitable for industrial, energy and power, oil and gas, and petroleum industries. Design standards meet or exceed most industrial, aerospace, and military specifications.

Only one movable component with good vibration, pulsation, and impact performance

No connecting rod, spring, gear or liquid filling, will not wear, break or leak

Explosion proof: Explosion proof pressure (overpressure) exceeding 150% F.S. of industry standards. Endure the daily tests of unpredictable industrial environments.

Reliable in media ranging from -65 ° F to 600 ° F

The accuracy is reduced by 25% due to temperature fluctuations.

The direct drive technology used in industrial instruments for commercial applications.

Micro seal compatibility: reduces the required filling fluid by 85%; The accuracy is reduced by 50% due to the influence of temperatures above 68 ° F; Low capacity design can be used on micro diaphragm seals, providing performance advantages and cost savings.

Origin: United States

Factory filling: None

Can be filled: None

Environmental operating temperature: -65 ° F to 190 ° F

Medium operating temperature: -65 ° F to 250 ° F

Window structure: Acrylic resin

Dial structure: stainless steel

Accuracy: ¼% FS

Pointer structure: Aluminum

Frame structure: ABS plastic

Burst pressure: 500% of FS or 25000 psi

Type: Direct Drive Test Specification

Pressure gauge size (inches): 4.5

Range: 0-5000 psi

Connection position: Bottom

Connection size: ¼ 'npt

Shell structure: ABS plastic

Wet component structure: stainless steel, chromium nickel iron alloy X-750, silver brazing

Industrial, energy and power, oil and gas, and petroleum industries