PLANECK liquid level controller FSR2-4E

Water solution level controller, can be used for level control or conductive liquid control. Liquid level control of conductive liquids.

Applicable: liquid level control, dry operation protection, overflow monitoring, etc. Operation mode: If the liquid level is lower than the set Min value (electrode 5), the system can automatically start through relay contacts A and B (valve control). When the Max value is reached, relay contacts A and B switch again. However, if the liquid level further drops, such as due to leakage, below the sub Min value (electrode 8), the entire system can be closed through relay contacts D and C.

Can cooperate with the motor protector to protect the water pump motor;

High water level protection and locking to prevent water leakage;

Current sensing, stable operation, strong anti-interference ability

Origin: Germany

Special voltage for load connection: 230V AC, 50Hz, approximately 2VA as needed

Measurement voltage: 20V AC, 50Hz

Relay contact: Max=6A, 230V AC non potential free

Applicable electrodes: V2A, steel, brass, copper

Unsuitable electrode: AL

Shell protection level: IP 40

Terminal protection level: IP 20

Shell base material: Macrolon 6020 (30% GF) UL94V-1

Color: Light Grey

Terminal quantity shell: Makrolon 2800, UL94V-2

Color: Smoke gray

Terminal: Tin plated steel plate wire section Max 2.5mm ² rated current terminal/terminal pin Max 16A

Temperature: -40 ° C to+110 ° C

Size: 75mm in length, 45mm in width, and 110mm in height

Tightening: Standard rail quick fastening according to DIN 46277 and DIN EN 50 022 standards

Liquid level control, dry operation protection, overflow monitoring, etc