PLS type fully balanced connecting rod vibration conveyor

Introduction to Balanced Connecting Rod Vibration Conveyor

The PLS type fully balanced connecting rod vibration conveyor is a type of vibration conveyor developed on the basis of the double mass resonance type. It uses a conveying tank with equal mass to move relative to the balancing body (or conveying tank). When using the conveying tank as the balancing body, it can simultaneously transport materials in both directions. The conveying tank body and the balance body (or conveying tank body) are connected by a swing rod, and a rubber hinge is provided at the middle position of the swing rod. The bracket is supported on the foundation through the rubber hinge. When the machine is running, the two vibrating bodies vibrate in opposite directions due to the swing of the guiding pendulum around the midpoint. When the masses of two masses are equal, the inertial forces generated by the two masses are equal in magnitude and opposite in direction, and their inertial forces are balanced, so it is called a "balanced" vibrating conveyor.

Characteristics of Balanced Connecting Rod Vibration Conveyor

1. Due to the good balance of inertial forces, the inertial vibration force (dynamic load) transmitted to the foundation is very small;
2. When installed on the floor or steel structure support, it has unparalleled vibration reduction advantages compared to other types of vibration conveyors;
3. The structure of the fully balanced connecting rod vibration conveyor is simple and easy to install and maintain;
4. The working noise is below 75dB (A);
5. The fully balanced connecting rod vibration conveyor is suitable for long-distance and wide groove conveying requirements;
6. Install a screen inside the conveying tank, and achieve material classification or separation while conveying materials in one-way or double-layer conveying tanks;
7. If the balance body is changed to a conveying tank, it can achieve simultaneous reverse conveying of the upper and lower conveying tanks, producing the effect of using two conveyors without increasing equipment and space;
8. For high-temperature materials that need to be transported, there are no restrictions on particle size, corrosiveness, relative hardness, etc. Depending on the type of material being transported, stainless steel plates or composite materials can be used;
9. Drying, cooling, sorting, drainage and other processes can be carried out simultaneously, making this conveying program an extremely efficient conveying method;
10. Parts such as rotation, swing, friction, and consumption require minimal injection of lubricating oil, resulting in a low failure rate. Maintenance and upkeep are very easy.

More related conveyor knowledge: vibrating conveyor