POREX Poly TUF tubular softening film module from the United States

TUF tubular softening membrane specifically designed for leachate from garbage incineration plantsIt is a type of tubular membrane in which a fluorinated polymer film layer is cast onto the inner wall of a sintered organic polymer porous support tube, allowing the filter membrane to deposit in the wall layer of the sintered porous plastic tube. The effective interception interface is located on the inner wall of the support tube, and it has a filtration accuracy of 50nm. It is mainly used for solid-liquid separation in wastewater softening treatment. The membrane module adopts a tubular support structure, and the film layer is fully anchored or chemically bonded to the sintered porous plastic to make it. The component is designed for cross flow filtration mode, and its filtration aperture range belongs to the microfiltration and ultrafiltration range. And POREX tubular membrane modules have excellent chemical resistance, temperature resistance, and friction resistance.

TUF tubular softening filmCan remove heavy metals (Ca2+, Mg2+, Ba2+, Sr2+); Friction resistant, suitable for solid-liquid separation of rough particles; Microporous membrane, providing excellent filtration water quality and low SDI (generally less than 0.5 NTU); Large channel, cross flow circulation, allowing high solid load without pre-treatment.

The TUF tubular softening membrane sintering tube process gives the membrane core a "peak and underestimation" filtration inner surface structure, and the support tube "peak" can protect the PVDF membrane located in the "valley" from high abrasion and water ingress wear.

High concentration tolerance:

Can handle high concentration (up to 5% mass concentration) feed solutions. Sometimes it may be higher. TUF tubular softening film

Strong resistance to manufacturing:

Friction resistance and particulate matter propertiesSuitable for solid-liquid separation of rough particles.

Through parallel testing of anchored membrane tubes (TUF softened membrane) and coated membrane tubes (from other manufacturers), the filtration layer of the anchored membrane was found to be intact and functioning normally; The coating membrane filtration layer is layered, the membrane skin is peeled off, and the supporting pipe wall is exposed.